To replace the side rear view mirror on your Accord this tutorial was tailor-made for you. You will be asked to open the door, disconnect the side view mirror connector, remove the side view mirror as well as carry out a few other steps. You can carry out this tutorial of 5 chapters in 45 minutes. Take your ratchet and your 8 mm socket and let’s get started!
45 minutes
5
2
$75
Open the door
Turn your engine off and set the parking brake. Open the door.
Disconnect the side view mirror connector
Remove the plastic covering the side view mirror’s retaining nuts.
Disconnect the electrical connector from the side view mirror by pressing the tab.
Remove the side view mirror
Using a ratchet and a 8 mm socket, unscrew the 3 retaining nuts from the side view mirror.
Then use a flat head screwdriver to pry the connector tabs in order to pull out the mirror.
Take off the side view mirror.
Install the new side view mirror
Take the new side view mirror.
Insert the side view mirror into its housing. Then screw the 3 nuts back in, by hand at first.
Finish off tightening with a ratchet.
Finalise the reassembly
Plug the electrical connector back in.
Reinstall the plastic that covers the side view mirror retaining nuts.
Operation complete.