How to replace the air filter 2009-2018 Dodge RAM 1500
To replace the air filter on your RAM 1500 It’s easy. You will need to open the hood, access the air filter, remove the filter as well as carry out a few other steps. You can carry out this tutorial of 5 chapters in 15 minutes. Take your vacuum and your tutorial and let’s get started!
Duration
15 minutes
Number of steps
5
Difficulty out of 5
1
Average savings
$40
Parts You Will Need
Tools You Will Need
Step-by-Step Installation
Chapter 1:
Visualise
Step 1/2
Turn off your vehicle’s ignition, set the parking brake, pull the hood release handle and open the hood.
Chapter 1:
Step 2/2
You should now be able to easily see the airbox to change the filter.
Chapter 2:
Remove the filter
Step 1/3
Unclip the four holding latches on the airbox cover.
Chapter 2:
Step 2/3
Pull out the flange.
Chapter 2:
Step 3/3
Take out the air filter.
Chapter 3:
Clean the airbox
Step 1/1
Before putting in the new filter in place, it is important to clean out any impurities or leaves stuck in the filter compartment.
Chapter 4:
Install the new filter
Step 1/2
Take the new filter.
Chapter 4:
Step 2/2
You can now put the new filter in place.
Chapter 5:
Finalise the reassembly
Step 1/3
To put the flange in, incline it so that the interlocking studs go in first.
Chapter 5:
Step 2/3
Finally, lock the flange with the four latches.
Chapter 5:
Step 3/3
Operation complete.