How to replace the windshield wipers blades 2009-2018 Dodge RAM 1500
To replace the windshield wipers blades on your RAM 1500 It’s easy. You will need to set up, remove the front windshield wiper blade, install the new blade as well as carry out a few other steps. You can carry out this tutorial of 3 chapters in 10 minutes. Take your paper towels and your tutorial and let’s get started!
Duration
10 minutes
Number of steps
3
Difficulty out of 5
1
Average savings
$15
Parts You Will Need
Tools You Will Need
Step-by-Step Installation
Chapter 1:
Set up
Step 1/2
Turn your engine off and set the parking brake.
Chapter 1:
Step 2/2
Lift the wiper blade arm up until it’s locked in the upper position.
Chapter 2:
Remove the front windshield wiper blade
Step 1/2
To remove the blade, pinch the two plastic tabs located on either side of the arm between two fingers, lift the locking flap and then slide the blade downwards to remove it.
Chapter 2:
Step 2/2
To avoid any accidents, place the arm delicately onto the windshield. Before doing so, place a folded piece of paper towel on the windshield to protect it.
Chapter 3:
Install the new blade
Step 1/4
Take the new blade.
Chapter 3:
Step 2/4
To put the new one in place, slide the blade into place, then fold down the locking flap.
Chapter 3:
Step 3/4
Place the arm back down gently.
Chapter 3:
Step 4/4
Operation complete.