Hi Michael, I'm glad to assist you. This requires draining the fuel and removing the fuel tank from underneath the bed to replace the defective fuel pump assembly. This needs much extensive work to be done with prior experience in doing this kind of maintenance procedure. Please check online car parts video sharing websites for DIY install procedures of fuel pumps for your vehicle. Still, it is best if you can have this done by a certified mechanic. Take advantage of our lowest sale price offer. Click the link below to order this today. I hope this helps. Happy shopping. https://www.carparts.com/fuel-pump/drivemotive/rd31450007?can=CPJE1043

Hey Michael, the best way to go about this is to drain your tank first. You can buy a cheap drill-driven pump at any Harbor Freight, and then get a suitable fuel container with enough capacity for the amount of fuel you have in the tank. Adapt the drill pump to the fuel tank outlet (you'll have to get a little creative), and empty it out. Then, you have to drop the tank down, and then you can remove and change the pump. The new pump has screws on top, and requires a fresh gasket or o-ring when you set it in to replace the old one. The plugs should all be the same and you just swap connections. I hope this helps.

Some cars have hole in floor pan under rear seat. All others you will have to lower the fuel tank. Sending unit is inside the tank.

Hi Jeremiah, I'm glad to assist you. Yes, it will. Click on the link below for direct ordering to take advantage of our ongoing sale and limited stocks. I hope this helps and happy shopping. https://www.carparts.com/fuel-pump/drivemotive/rd31450007?can=CPAE1047_20220530

It will, you just have to get the one that fits the gallon quantity of your fuel tank

Hi Dan, I'm glad to assist you. No. As stated in the fitment description, this is only compatible with the 2007-2009 6.7L long-bed models. We have the correct fuel pump assembly for the 2010 Dodge Ram 3500 6.7L with a short bed available under part number E7261M, or you can click on the link below for direct ordering to take advantage of our ongoing sale and limited stocks. I hope this helps and happy shopping. https://www.carparts.com/fuel-pump/airtex/afe7261m?can=CPAE1047

Hi Dan B., to be honest with you, the truck I bought this for requires part number #NNP C0497M. The part I think fits yours is #DFP FG1944, if your bed is 72.3 inches long. Just know that there are a ton of these pumps that all look alike, but they're not the same. So I think the short answer is "no", this doesn't fit your truck but CarParts does have the right one in stock. Best of luck

Hi Dannis, As per checking, the width or diameter of this item is 7.5 inches.

Hi Dannis, As per checking, the width or diameter of this item is 7.5 inches. It worked very well for our Dodge Ram dually, and the best price around. Hope this helps!

Hi Paul, I am pleased to assist you. This fuel pump typically uses a 4-wire configuration that includes connections for fuel pump power, pump ground, fuel level sensor signal, and sensor ground. While wire colors can vary by vehicle, black/yellow and blue wires are commonly associated with these functions. However, because wiring colors and roles can differ between models and years, it's important to consult the specific wiring diagram for your vehicle to correctly identify each wire’s purpose. If your vehicle information and details match this product, use the link below to order while the part is in stock. I hope this helps, and enjoy shopping! https://www.carparts.com/fuel-pump/drivemotive/rd31450007?cpcid=Q1BHRzQ4NTB8V3JpdHRlbiBJbnRlcmFjdGlvbiBUZWFtIC0gQ1NRQXwvZnVlbC1wdW1wL2RyaXZlbW90aXZlL3JkMzE0NTAwMDd8MjAyNTA0MjI=