Hi Richard, A single beam headlight system uses two headlight bulbs, one for the low beam and another for the high beam.

I ordered both headlights (2) for our old Dodge caravan and my son put them in less then 25 minutes. He said they fit perfectly and we can see to drive it at night!!! The van needed new head lights. And, the price for them was reasonable. Thanks, Dianne S.

That is correct!

Hi Marco, Yes, these are the headlight and the turn signal lights in one assembly. it is for the single beam headlight and beside it is the turn signal light in amber color. Both come with the bulbs, plug and play.

Yes. The assembly is complete in all respects regarding headlights & side lamp turn signals, exactly as pictured, and includes all new lamps with all new sockets cabled with proper connectors for easy fitment to the original harness. The plastic inner fenders have a large pop-out insert intended for access to the side-lamps connector. Both units were received in urethane-foam packaging for an undamaged product on receipt, and the cost seems more than reasonable in a market gone mad with shockingly overpriced goods of every description, even when quality is questionable or worse. Housings fit perfectly, are flawless otherwise, and constitute an excellent appearance improvement over the hideous old yellowed embarrassments due to the sparkling clarity of the new lenses/reflectors. Besides, unlike before, I can now see light in front of the vehicle, whereby I am prompted to express my opinion that introduction of plastic headlight lenses in lieu of glass rates as an outstandingly absurd initiative amid histories of technological counter-advancements generally, and ought to be illegal accordingly. The simple installation was not quite so easy as expected, because two of the original rusted studs broke during removal, and the remainder of the second was unmanageable for being locked in the hole by a flange on one side and a rust-welded nut on the other. Vice grips were not successful, I could not fit a hack saw in there to cut it in half, and did not have a hand-held cutoff grinder available as would have worked well. I removed the corresponding stud from the new housing. The fuse block can be rotated upward, by design, as hinged by two bosses, which is useful to know, because gaining the clearance achieved thus is necessary. A bit of patience helps toward installation of the driver's side headlight due to access restrictions, and a universal joint on your socket extension will be very helpful. If your old studs don't break, the whole process will be relatively easy.

It has two openings. One for headlight and the other is for turn signal

yes they both did and both removal and installation was so simple

Yes, the turn signals are included with the assembly

Hi Vicki,Yes, the single beam headlight is for both bright and dim. No need to worry about the bulbs, it is already included on the headlights.

YES, THE RIGHT & LEFT SIDES

single bulb

Yes

Hi Michael, The headlight focus adjustment is done after you install the headlight in place. The screw adjuster is located at the back of the housing of the headlight.

Only if needed , the ones i installed come just aim at the right spot so i did not adjust them but is very easy to set your new lights

Hi Marco, The turn signal light or blinker light is the amber part of this headlight assembly.

Yes the clear is the headlight and the orange is the blinker

Complete light assy. Exact duplicate of OEM.

Yes, and the signal works great.