There are currently no answers for this question.

Hi Dave, thank you for reaching out. We suggest you refer to a vehicle repair manual for the installation guide. You can also check YouTube for any videos shared on how to install this product. You can use this link to go back to the item page and continue ordering the part at 39% off the regular price today: https://www.carparts.com/license-plate-bracket/replacement/repf017329?can=CPAP3648_CSQA_20221019 I hope this helps. Enjoy shopping.

There were not any specific instructions but the bracket fits the contour of the bumper and I believe there were indents in the bumper where the rivets go. I had to take the car to a local auto shop because my rivet gun would not grip the plastic rivets, that were provided, properly. They finally used aluminum rivets to fasten the bracket because they did not have a rivets gun that fit. I think you might be able to skip the rivets and just attach the bracket to the bumper with bolts. That us what the local Ford dealer said would work with the Ford production bracket.

There is no video. So I just centered it on the front where it fits the best and drilled and used coarse thread screws to mount the bracket.

Hi Norman, As per checking, this item does not come with installation hardware. We suggest getting those locally through a local auto supply store or the dealership.

It comes with plastic pop rivets. I used self tapping screws and plated flat washers and drilled very small pilot holes. This worked well and was very easy.

It does not, I had to purchase it myself. I used some short sheet metal screws from the hardware store and just drilled them in, no pilot hole needed.

No