Hi Chuck, thank you for reaching out! Upon checking, we do not have that part available or know of anyone who sells it. Have a great day!

Hi Chuck, I'm pleased to assist you. No, this is not suitable for the 2010 Ford Explorer Sport Trac. We currently do not have in stock the turn signal switch for the vehicle. Have a nice day!

Hi Debbie, I'm glad to assist you. Before you start any electrical work on your vehicle, it's important to disconnect the battery cables to prevent any electrical shock or damage to your vehicle. The turn signal switch is located on the steering column, so you'll need to remove the steering column cover to access it. This cover is usually held in place by screws or clips, so you'll need to remove them to take off the cover. Once you've removed the steering column cover, you should be able to see the turn signal switch. It should be located on the left side of the steering column. The turn signal switch is connected to the wiring harness, which is located behind the steering column. You'll need to disconnect this harness to remove the old turn signal switch. Once you've disconnected the wiring harness, you can remove the old turn signal switch from the steering column. Take the new turn signal switch and install it in the same location as the old one. Make sure it's secured tightly and in the correct position. Once the new turn signal switch is in place, reconnect the wiring harness to the switch. Put the steering column cover back in place and secure it with screws or clips. Finally, reconnect the battery cables to restore power to your vehicle. I hope this helps, and if you're interested in this part, you can click on the link below for direct ordering to take advantage of our ongoing discount and limited stocks. Happy shopping. https://www.carparts.com/turn-signal-switch/standard/sicbs1896?can=CPAE1047_CSQA_20230424