Magnaflow® 23884 Catalytic Converter, 3.0L, 6Cyl, Federal EPA Standard, 46-State Legal (Cannot ship to CA, CO, NY or ME), Standard Grade Series, Direct Fit
Manufacturer #23884
|
Magnaflow® 23884 Catalytic Converter, 3.0L, 6Cyl, Federal EPA Standard, 46-State Legal (Cannot ship to CA, CO, NY or ME), Standard Grade Series, Direct Fit
Manufacturer #23884
|
$277.00
| Label | Value |
|---|---|
| Part | |
| Brand | |
| Emissions | Federal EPA Standard, 46-State Legal (Cannot ship to CA, CO, NY or ME) |
| Notes | Gaskets Included; 18 in. overall length |
| Restricted States | California|Colorado|New York|Maine |
| Type | Catalytic Converter |
| Product Fit | Direct Fit |
| Recommended Use | OE Replacement |
| Quantity Sold | Sold Individually |
| Gasket Included | Without Gasket |
| Oxygen Sensor Ports | 0 Sensor Port |
| Oxygen Sensor Port Location | Factory OEM Locations |
| Warranty | Magnaflow 25,000 Mile Limited Warranty |
| Prop 65 Warning |
|
| Replaces OE Number | 642409, 15653, 16071, 40008 |
| Interchange Part Number | 642409, 15653, 16071, 40008 |
| Specialty Part | Performance Part by JCW |
| Eonumber | Not Applicable |
| Series | Standard Grade Series |
| Tube Material | Stainless Steel |
WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
Not satisfied with your purchase? We offer returns for most items within 30 days of delivery for a refund. Check out our Return Policy for more details.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Magnaflow®Catalytic Converter, 3.0L, 6Cyl, Federal Epa Standard, 46-State Legal (Cannot Ship To Ca, Co, Ny Or Me), Standard Grade Series, Direct Fit
1 Star
0
2 Star
0
3 Star
0
4 Star
0
5 Star
100
Customer ServiceCatalytic Converter, 3.0L, 6Cyl, Federal Epa Standard, 46-State Legal (Cannot Ship To Ca, Co, Ny Or Me), Standard Grade Series, Direct Fit
5.0/5
The customer service was exceptional, Magna Flow went above and beyond to track my package down and made sure I received my order after Fed Ex was denying that they had made a mistake and shipped my order to the wrong address. The follow-up and professionalism exhibited by their staff were greatly appreciated and refreshing to see in an age where companies tend to lose focus on customer value and service. Thanks again for the wonderful assistance and care, greatly appreciated.
Sincerely, Mark A Sias
MS
Posted by Mark S. / Thu, Sep 11
Originally posted at Magnaflow
Fits as advertisedCatalytic Converter, 3.0L, 6Cyl, Federal Epa Standard, 46-State Legal (Cannot Ship To Ca, Co, Ny Or Me), Standard Grade Series, Direct Fit
5.0/5
Converter shown in picture is the EXACT product that I recieved. Measurements were right on. It is one piece. C-Stuff tech told me this would not work on my vehicle - I called M-Flow direct and spoke with a techie, he said it would fit and it did fit - no modifications at all. I installed this on a 1991 Toyota Pickup, base model, 4WD, with Calif. emission exhaust system. Holes in converter flanges are oval shaped (so this will fit a variety of exhausts) so you will need some flat washers to prevent your nut from catching the side of this hole when tightening. I used a 2" long, 14mm head bolt. M- Flow has started putting gaskets in with their converters and accidently put two rear gaskets in this model. I let M- F know about this and they are working to correct this issue. However, there are already several of these boxes out there on distributor shelves, so plan to buy a front gasket at your local auto parts store. Don't plan on using your old bolts, my broke off after two turns of the wrench. If the bolts won't come off, cut them off with a sawzall - you won't hurt anything. This converter can go on in either direction - however, note that it will only go one way because of the flanges on your exhaust pipes. Also note that the heat shield goes on the top (facing your bed), NOT on the bottom (facing the road). DO NOT bang on your pipes with a hammer as the vibration will break the ceramic in O2 sensors!! Shipping via FEDX was slow, took 10 days to ship from Wis. to Col. because they ship it through FEDX Smart Post which means it goes FEDEX ground, then to your local post office for re-shipment. FEDX tracking showed it sitting in my town for 3 days before it made it to my door. If you want it faster than that, then ship it another way - you will pay for it. I am a backyard mechanic and R&R'd this converter in 50 minutes with standard wrenches. Truck runs like new.
J
Posted by Jmac / Sat, Dec 10
Awesome purchase, best value period!Catalytic Converter, 3.0L, 6Cyl, Federal Epa Standard, 46-State Legal (Cannot Ship To Ca, Co, Ny Or Me), Standard Grade Series, Direct Fit
5.0/5
Cons only minor and are solved with cutting wheel on a dremel strategically applied to gaskets for needed fit when torqued and compressed. Four (3VZ-E) head bolt washers addressed large holes, with stock threaded hardware reversed to fit into wide slots for centering at foreward flange. (All merely supplementing replacement oem bolts, locking exhaust nuts, and gaskets.) Has a sweet new raspy tenor tone and I'd swear it has better torque and response. (3.0L V-6.)
If it still passes DEQ emmissions testing this August, 2008 (I'll let you know)...well, you guys kick #%@!!! I will definitely recommend your store in and out of the shop. Thanks buku lotz, Jim Morrison
t
Posted by toyota_master_tech / Sun, Mar 16
Showing 1 - 3 of 3 Reviews
Have a question about this product?Ask here. Our team of experts will assist you along with your fellow CarParts.com community members. Please add your vehicle information including year, make, model to better assist you.