Hi Troy, I'm glad to assist you. This is not compatible. We don't have a direct-fit intake manifold for a 2005 Ram 1500. We suggest checking the local part stores around your area on what they have available to offer you. I hope this helps, and we thank you for inquiring.

Hi Jr, I'm glad to help you out. We currently don't have the upper intake manifold for the 1993 Nissan 240SX. We suggest that you get those from the local auto parts store. For more maintenance parts, we have a sale on brake parts. To get one for your vehicle, click this link: https://www.carparts.com/search?q=brake I hope this helps. Happy shopping.

Hi Lee, I'm glad to help you out. Unfortunately, we currently don't carry direct-fit lower intake manifolds for the Suburban. We suggest checking the local parts stores around your area or the GM dealership directly on what they have available to offer you. I hope this helps and happy shopping.

Hi Buddy, I'm glad to assist you. Yes, this is usually for custom built vehicles, hot rods or special built vehicles with a custom engine on it. As per checking, this will work on a GM Small Block Gen III/IV (LS Based). This is not a direct fit intake manifold for a specific vehicle application. Please click the link below for your product reference from our supplier's website. I hope this helps. Happy shopping. https://www.holley.com/products/ls_power/ls_intakes/parts/820201

Hi Chris, This is a universal part and usually used for competition racing and it is against the law to install this part on an Emissions Controlled Vehicle. Here are the specs of this part - GM Small Block Gen III/IV (LS Based) Emission Code 4; 3mm (1/8") thick T6061 sheet aluminum construction; Front Height 11.082 inch; Front Width19.4292 inch; Rear Height9.738 inch; Rear Width 13.2844 inch; Runner Length 4.921" (125mm); Throttle Bore 92mm; Vacuum Ports (3) 1/8"-28BSPT & (1) 1/4"-19BSPT; Long Intake runner lengths (12.75 inches) offering low-end torque and operating range of 1600-6800 RPM.