Hi James, This item still has the same specifications.

If you mean do you have to push down to go up and up to go down still, then yes you do. But still a good price!

Yes. Mine are reversed as well. I have just put up with it.

Not sure. Mine was reversed. But it’s a 2006

Hi Debra, I'm glad to assist you. It should be moderately easy if you have basic maintenance already done on your vehicle. The first step is to remove the screws of the interior door handle, carefully pry out the door handle and bezel, carefully pry out the edges of the door panel so as not to break the locking pins, remove the door panel and unlock the door switch wiring socket, remove the plastic film protection from its butyl tape sealed edges, you will now have access to the inside of the door, loosen up the 2 bolts that secure the window glass, remove the glass carefully, loosen up the bolts of the window regulator, remove and replace the defective regulator. Then install all parts the exact same way you have removed it. Grab our discounted sale price offer and click the link below to order today. I hope this helps. Happy shopping. https://www.carparts.com/window-regulator/replacement/repj462909?can=CPJE1043

this part is pretty easy to replace and can be done in about 30mins if you know anything about working on cars, the only thing is I found that the wiring was wrong (up is down) so I just did a cut and splice it works fine, you should plug it in and check before putting it in the door