Curt® 11066 Hitch 1.25 in. Receiver
Manufacturer #11066
|
Free Shipping
Free Shipping
Curt® 11066 Hitch 1.25 in. Receiver
Manufacturer #11066
|
$270.49
| Label | Value |
|---|---|
| Part | |
| Brand | |
| Location | Rear |
| Notes | Square Main Body; With Pin And Clip; Ball And Ball Mount Sold Separately |
| Class | Class I - Up To 2000 lbs. |
| Receiver Tube Size | 1.25 in. Receiver |
| Maximum Gross Trailer Weight | 2000 lbs. GTW |
| Maximum Tongue Weight | 200 lbs. TW |
| Color Finish | Powdercoated Black |
| Quantity Sold | Sold Individually |
| Warranty | Lifetime Curt limited warranty with 1-year warranty on finish |
| Prop 65 Warning |
|
| Promo Details | Get up to 10% OFF On Curt & JCW Hitches. NO Coupon Required. |
| Specialty Part | Performance Part by JCW |
| Product Fit | Direct Fit |
| Recommended Use | Bike Racks, Cargo Carriers, Spare Tires, Recovery Winches, Tow Loops or Similar |
| Requires Drilling | Minor drilling required |
| Series | Trailer Series |
WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
Not satisfied with your purchase? We offer returns for most items within 30 days of delivery for a refund. Check out our Return Policy for more details.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Curt®Hitch 1.25 In. Receiver
1 Star
0
2 Star
0
3 Star
0
4 Star
0
5 Star
100
The Perfect Little HitchHitch 1.25 In. Receiver
5.0/5
Overall, a very nice, compact little hitch. I installed this on my 1990 Geo Prizm, base model, to tow a small 4' x 6' cargo trailer, and it works great! No drilling was required on mine, as it aligned nicely with the factory, pre-installed weld nuts in my bumper. During installation, I had to remove the long trim piece on the underside of my bumper, holding the thick protective rubber covering to the bumper. Where the hitch attached to the bottom of the bumper, I had to cut out two small (approx. 1-1/2" x 2-1/2") pieces of the protective rubber, so the lower mounts could fit flush against the bumper. Then I had to cut my one piece trim into three pieces, as the lower mounts took its place. This trim piece then had two longer outside pieces and one short piece (between the lower mounts), but was not a problem with the existing mounting holes in it. I ground the sharp edges smooth and all three pieces fit right back on. Not too difficult, by any means, but did take a little time. The mounted hitch receiver looks clean and mostly hidden. I bought the receiver hitch without the ball mount, as I knew I was going to need a drop down / riser mount for the 2" ball I used. Overall I'm very happy with it, as it functions flawlessly.
Lt
Posted by Long time JC Whitney customer / Mon, Apr 22
Originally posted at JCWhitney.com
Showing 1 - 1 of 1 Reviews
Have a question about this product?Ask here. Our team of experts will assist you along with your fellow CarParts.com community members. Please add your vehicle information including year, make, model to better assist you.