Shop Parts keyboard_double_arrow_right
Need car parts? Select your vehicle
Reading Time: 2 minutes
Summary
  • The anti-theft fuse is typically in the fuse box on the driver’s side.
  • Depending on the vehicle’s specifications, the anti-theft fuse can also be found under the hood and behind the air filter.
  • You can use a fuse puller or a pair of pliers to disable the alarm.

Q: Where Is the Anti-Theft Fuse Typically Located?

A: The anti-theft or car alarm fuse is usually found in the fuse box on the driver’s side. It should be directly in front of your left knee covered by a plastic panel.

fuse box located on driver side of car
The anti-theft or car alarm fuse is usually found in the fuse box on the driver’s side.

In some vehicles, the anti-theft fuse can be in the fuse box under the hood that’s also on the driver’s side. The fuse box should be behind the air filter.

For Ford vehicles, the anti-theft fuse isn’t labeled, so you’ll have to refer to a specific reference number to find it.

See also  No Power to the Dash or Ignition? Here Are Some Potential Causes

Sudden impact or motions inside the vehicle can trigger the anti-theft alarm. Usually, the alarm has a security light that stays on even when the engine is off. The light should go off once the engine starts.

Depending on the vehicle’s specifications, the anti-theft alarm can also prevent the engine from starting. It can also lock you out of your vehicle under certain conditions.

AI robot
ELI5

The anti-theft fuse is a small part in your car that helps run the security system. It's usually found in the fuse box on the driver’s side, directly in front of your left knee. In some vehicles, the anti-theft fuse can be in the fuse box under the hood, usually behind the air filter. For Ford vehicles, the anti-theft fuse isn’t labeled, so you can find it by looking for a specific reference number.

Tips on How to Access the Anti-Theft Fuse

The exact location of the anti-theft fuse should be in your owner’s manual. Once you locate the right fuse box, there should be markings on each of the fuses or color-coded plastic covers. These covers usually have numbers on them that correspond to a specific circuit.

If you’re planning to disable the alarm, you’ll need a fuse puller or pliers to disconnect the fuse.

Never use a higher amperage fuse than the anti-theft fuse calls for. If the fuse is blown, it means that something else had been working too hard and pulling too many amps.

About The Authors
Written By Automotive and Tech Writers

The CarParts.com Research Team is composed of experienced automotive and tech writers working with (ASE)-certified automobile technicians and automotive journalists to bring up-to-date, helpful information to car owners in the US. Guided by CarParts.com's thorough editorial process, our team strives to produce guides and resources DIYers and casual car owners can trust.

Reviewed By Technical Reviewer at CarParts.com

Tony Harlin is a Master Gas and Diesel Diagnostic Technician with over 18 years of experience. He works full-time at a large independent automotive shop as a driveability and repair technician working on all types of vehicles with a focus on diesels. ASE certifications include A1-A9, L1 and L2, as well as X1.

Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.

File Under : Electrical System , DIY Tagged With :
Holley Overstock Sale
Subscribe
Notify of
guest
6 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
expand_more
CarParts.com Fix-It-Forum BE PART OF OUR COMMUNITY: Share your knowledge & help fellow drivers Join Now