Five Tips to Keep your BMW Bumper Cover in Good Shape
Among the many parts of your vehicle's fascia, your BMW bumper cover is one of the most prone to get damaged and worn out. Being at the forefront-literally-of the vehicle, this part is susceptible to getting scratched, fading, and breaking. This part serves as the safeguard of your bumper, keeping it from being the one that is scratched and dented. While it is inevitable that you bumper cover will soon break down, there are a couple of things that you can do to keep it in good condition-at the very least.
- Keep it clean.Although this tip might seem a bit of a giveaway, there are several drivers and car owners who do not take time to clean their vehicle. What's worse, they just clean the mirrors and ignore the other parts! Whenever you wash your car, make it a point that you spend a couple of minutes cleaning the bumper cover. There might be dirt and debris stuck in its corners, which can cause the color to fade if neglected. Use only mild soap and water to do so, and avoid strong concentrated cleaners.
- Drive carefully.Doing this will benefit not only your bumper cover but also your car in general. Driving defensively can keep your BMW bumper cover from any dents and scratches. You should also take extra care when you are parking or moving your vehicle since this is one of the easiest ways for your bumper cover to get a dent or two. Always maintain proper distance behind a vehicle to keep you from getting bumped.
- Ensure bolts are intact.One of the biggest risks to your BMW bumper cover is for it to fall off while you are driving. Some bumper covers have a bolt-on feature, which makes it easy to install yet easy to give in as well. When your bumper cover falls off, it could cause it the greatest damage. To avoid this from happening, it is important to take time to check whether the bolts are still intact and in good condition. When the bolts and mounting hardware are already a bit rusty, make it a point to replace them as soon as possible.
- Fix dents immediately.At one point or another, your bumper cover will develop dents and bulges. It is important to give it immediate action before it worsens. If your bumper cover is made of polyurethane plastic, a quick fix would be to use a heat gun to restore it. Simply remove the cover and apply heat on the dented part. If you have a chrome plate metal cover, you can try using a rubber mallet to pound it back to its original shape. Just put a wooden block on the inside and knock the dent out carefully with the mallet.
Know when to replace it.Just like any other car part, the bumper cover will not last forever. You should know when it is time to replace your bumper cover with a new one. If it doesn't look like it can still be repaired, then buy a new one. This doesn't only ensure that your car will look good, but it also gives your vehicle the protection that it needs.