How to Keep Your Ford E-350 Super Duty Bumper Functioning at Its Best
When looking at the exterior part of your vehicle, the bumper is one of the first parts anyone would surely notice. This car part is very essential at all costs. It helps protect the exterior components of your such as the hood, grille, and the headlights against major damage in case of low-speed collisions. It also contributes on the overall quality of your vehicle. Because of its tasks, it is important that you keep your Ford E-350 Super Duty bumper in good condition. Check out these helpful tips:
- Apply diluted lacquer thinner or cleaning gel on the surface of your bumper.
For removing scratches or paint stains on your bumper, you can apply diluted lacquer thinner on the surface of the bumper. This solvent can dissolve the paint substances, and can also smoothen out any uneven surface caused by paint clumps. In addition, you can also use a cleaning gel for the restoration of your bumper's surface. You can reapply the gel each time you want to refurbish the look of your bumper.
- Spray and brush the corroded areas of your bumper with rust remover.
If your Ford E-350 Super Duty has a steel bumper, you need to check it regularly for signs of rust and corrosion. If you see that there are corrosive spots, you must spray the areas with soap and rust remover. You may also brush and wax the surfaces until the rust disappears.
- Make use of proper cleaning materials.
You must use a soft bristle brush for washing the dirt off your bumper to avoid scratching its surface. Applying undiluted white vinegar on the grimy spots can also help, as it is considered as a natural cleaning agent. While cleaning the bumper, it is also a good idea to check for abrasions and deep scratches that can expose the bumper's metal part. If you found any, deal with it as soon as you can to prevent rust formation.
If you want your Ford E-350 Super Duty bumper looking at its best, you must keep in mind this simple reminder: drive carefully. You should stay focused on the road, because your bumper will receive the first impact upon collision.
Three Helpful Tips for Your Ford E-350 Super Duty Bumper Installation
Your Ford E-350 Super Duty bumper helps absorb the shock in case your vehicle encounters minor crashes and collisions. It also protects essential parts of your car's exterior such as the headlights, hood, and grille. As a major component, it greatly affects the vehicle's frontal appearance. If you encountered inevitable and you need a new bumper for replacement, you save a great deal of cash and effort by doing the installation all by yourself. Here are some tips that can guide you in installing your Ford E-350 Super Duty bumper:
Tip #1: Make sure to get an exact replacement of your stock bumper.
The best way to cut down installation time is to make sure that the new bumper is the exact replacement of the old one. It will make the entire process faster since its mounting points will be the same as those of the original, thus eliminating the need to drill new mounting holes or do any adjustments on the nearby components.
Tip #2: Test-fit the bumper into the vehicle prior to installation.
Before installing your new bumper, make sure that you test-fit it in your vehicle's frame to see if it has the exact measurement. If it does not fit, you can return it to the merchant for replacement. By doing the test-fitting days before your scheduled DIY installation, you will still have time to send it back to its merchant should there be problems like shipping damage and incorrect fit. You can choose to keep the bumper and just remove and adjust some components like the reinforcement bars but you have to do this with caution. This isn't a good idea if you aren't that familiar with the structure of your ride's front-end.
Tip #3: Elevate your vehicle for an easier installation.
For your safety and for a more convenient installation process, you must lift your vehicle before working on the bumper. You can do the lifting using jacks. Once it is elevated, support it with jack stands. To ensure your safety, make sure first that your ride is securely resting on the jack stands by wiggling it a little before starting off.