Maintenance Tips for Toyota Tundra Bumper
The bumper of the Toyota Tundra is designed to endure a lot of abuse, but it still does need maintenance from time to time. The location of the bumpers of the Tundra make it highly exposed to the elements, and over time this could lead to wear. But with regular care and maintenance, the bumpers will retain their top condition and appearance for many years to come.
Here are some helpful tips you can use to maintain your Toyota Tundra bumper:
Cleaning the bumpers of the Toyota Tundra can be as easy as taking your truck to a drive-in car wash, but we recommend washing the bumpers by hand. Aside from saving you money, cleaning the bumpers by hand allows you to be more thorough in removing dirt and debris from the bumper, especially on hard to reach areas such as near vents, edges, and corners. Make sure to use soft-bristled brushes or sponges as well as cleaning products that do not contain ammonia or other strong chemicals to avoid damaging the paint.
- Deal with scratches by buffing.
Whether it's from a rock kicked up from the trail or a shoddy parking job, scratches are among the common problems encountered with bumpers. And how you will fix these scratches depends on the severity of the damage. Minor scuffs, for instance, might still be remedied by buffing the damaged area using a polishing compound and a car buffer. More severe scratches, particularly those that penetrate the paint and the plastic, will require sanding and filling of the gauged areas with filler. However, if the damage is quite serious that it already compromises the structural integrity of the bumper, it might be better to replace the housing rather than repair it.
- Restore dull black or uncoated bumpers with tire cleaner.
Black matte or uncoated bumpers tend to get dull from constant exposure from the sun, but you can restore it to its original vibrancy with tire cleaner. Simply apply the cleaner onto the bumper with a clean cloth or, in the case of aerosol-based cleaners, spray directly onto the bumper surface. Make sure that the bumper is clean and free of dirt, grease, or car wax before application.
Key Installation Tips for Toyota Tundra Bumper
Been in a minor parking accident? Or are you switching to a custom fiberglass model? Whatever the case may be, you need to make sure the new bumper for your Toyota Tundra is properly installed. In this guide, we have listed down some essential tips for installing a new set of Toyota Tundra bumpers.
Tip #1: Clean and prep the bumper.
Bumpers are usually shipped in a rough, pre-primed state, so it needs to be cleaned and prepped before it is mounted onto the truck. Once out of the box, wash the bumper with soap and warm water, and wet-sand any bumps and imperfections on the bumper surface. If there are serious defects on the bumper, consider having it returned for a replacement from the manufacturer.
Tip #2: Take note of and keep the fasteners in the safe place.
The bumper is secured to the frame through a series of plastic clips and fasteners, so take note of all of these when removing the old bumper from the frame. If any fasteners appear damaged or worn, have them replaced.
Tip #3: Be careful around the air bag sensors.
Air bag sensors are square, black devices mounted strategically around the bumper area and are designed to trigger the air bags, so make sure not to touch them to prevent accidental deployment of the bags.
Tip #4: Do some heavy lifting.
While you can certainly mount the new bumper without it, lifting the truck will make it easier for you to gain access and remove the bumper fasteners, especially those underneath the engine bay and the wheel well. Make sure to use a pair of heavy duty jack stands and place them on the either side of the vehicle frame. Better yet, you can use an industrial hydraulic lift if you have access to one.
Tip #5: When installing the new bumper, start with one side first.
Line up the clips with the holes in the frame, and do the same to the other side. Doing so will make it easier to attach all of the clips snugly into place, although you will need an extra hand to support the bumper while you do this.
Frequently Asked Questions
The front bumper of a two-year old Toyota Tundra truck already has little rust spots that aren't supposed to be there since the car is still new. What could possibly cause this?
For a chrome-plated stock bumper of a Toyota Tundra, it is expected to be rust-free for up to five to ten years. However, there are certain factors that could lead to this part to wear off earlier than expected. Frequent exposure of the Tundra to rain or even to the exhaust gases of vehicles would cause it to rust. But since the Tundra is covered by a warranty, the dealer could replace the bumper if the owner wishes to, given that the car is relatively new and the damage could be caused by a problem with the chrome-plating process of the truck's bumper.
The steel rear bumper of the Toyota Tundra recently got hit. When buying an aftermarket rear bumper replacement, which is better: a direct fit or an OE replacement?
An original equipment (or OE) replacement rear bumper could better restore the authentic look of the stock bumper compared to its direct fit counterpart. While this could be more expensive, it normally has a longer warranty period than others. It is made of high-quality materials, and it comes with the mounting hardware required during installation. It is advisable to buy an OE replacement especially if the owner wants to regain the authenticity of the parts--less the cost.
When buying an aftermarket front bumper for a Toyota Tundra, which type of finish is more durable and stylish: chrome-plated or primered?
Aftermarket steel bumpers--either chrome-plated or primered--are durable replacement parts for a Toyota Tundra's stock bumper. A chrome-plated bumper leaves a shiny and stainless finish, while a primered one gives a simple but elegant look on the fascia. It depends on the owner's preference what type of finish and color he/she wants to match with the body of the pickup.