Cadillac ATS: Tire Maintenance Tips for a Worry-Free Driving
Cadillac is known for having a running start when it comes to creating great cars. So it's not a surprise that you would love your Cadillac ATS that much. And to make sure that your ATS will stay in good condition and always have efficient performance, you have to know how to properly take care of it. Not to worry, most routine maintenance only need simple steps—ones you can do DIY-style. Tire maintenance, for one, can easily be done at your garage but can be very rewarding when it comes to you having a worry-free driving. Below are some tips on how to take care of your tires:
- Know the correct tire pressures for your car.
It is important to understand how much pressure should be in each of your tires, including the spare. Your tires lose pressure even when they are not in use because of the changes in temperature. A tire can lose up to half of its inflation pressure and still not look flat. Running on these underinflated tires can result to unnecessary tire stress, irregular tire wear, loss of control, and eventually, accident. The right amount of air for your tires is specified by the manufacturer and can be found in the vehicle's door edge, the door post, glove box, or fuel door. You should also check your Cadillac ATS manual. A good-quality gauge can be bought at an affordable price, and this will help you determine if your tires are properly inflated.
You need to replace your tires when the tread is worn down to 2/32 of an inch. This is necessary to prevent skidding and hydroplaning—both are dangerous driving conditions. When the tires have advanced and unusual wear, the tread will lose its ability to have good grip of the road in adverse conditions. You can avoid this by regularly checking the tires for uneven wear; take note of the high and low areas or unusually smooth areas. An easy way to test tread condition is to place a penny into a tread groove. If part of Lincoln's head is covered by the tread, then your tires are still good. You need to replace your tires if you can already see the head when inserted in the groove. You should also check the tires for any visible signs of damage as you check the tread.
- Rotate the tires regularly.
When you inspect your tires for physical evidences of damage and you notice uneven wear, this means your tires are due for rotation. Regularly rotating your car's tires will help in achieving a more uniform wear. Your owner's manual has a specific guideline for tire rotation that you should follow. But the common recommendation is to perform tire rotation approximately every 5,000 miles. It is also better to bring the car to the shop to check for wheel imbalance as well as other mechanical problems that could be causing uneven tire wear.
- Check your wheel alignment.
If you are constantly driving your ATS over unpaved or rough roads, there is a great chance that your wheels, especially the front end, will be out of alignment. This can damage your tires. Misalignment can cause uneven and rapid tread wear, so it should be corrected as soon as possible. It is advisable to have your wheel alignment checked periodically to avoid problems in the wheel well as well as getting premature tire wear.