The Ford cold air intake is a simple vehicle upgrade accessory that adds a great deal of power and performance to your vehicle. This easily installed vehicle accessory can add a boost of power that is quite noticeable when you step on the gas pedal, as much as many more complicated and expensive vehicle upgrades. The method used by the Ford cold air intake is quite simple, providing more engine power making the engine operate more efficiently. The engine runs at its most efficient when it receives a balanced mixture of oxygen and fuel for engine combustion, producing a cleaner burn of fuel which in turn produces more engine power. The Ford cold air intake provides a better supply of oxygen to the engine with a flow of cooler air. Cold air is denser than warmer air, holding more oxygen, giving a better fuel and air mixture to the engine for more efficient performance. The added power provided by the Ford cold air intake will not reduce the fuel mileage of your vehicle. In fact, fuel efficiency can often be improved with the installation of the Ford cold air intake. More efficient engine operation can have other benefits as well, such as less wear on sensitive engine parts, helping to extend the life of the engine. The efficiency added by the Ford cold air intake can reduce the vehicle emissions, reducing the pollution your vehicle sends into the air. You will find a quality selection of the Ford cold air intake in our online catalog, at very reasonable prices. Our site is secure for safe and easy ordering or our toll-free phone line can take your Ford cold air intake order just as conveniently.
A 4-Step Guide to Ford Cold Air Intake Installation
Many drivers who want to upgrade the performance of their vehicles go for a cold air intake installation. But how exactly does this work? Simple-it abides by the principle that cold air brings more oxygen, which will allow the engine's temperature to keep regulated. As a result, the vehicle's horsepower is increased because the engine's combustion power has been increased. So if you want to install a Ford cold air intake, here is a guide for you:
Required skill level: Expert
Needed tools and materials
- Service manual
- New air filter
- New hose clamps
Removing the old tube of the cold air intake
Locate the cold air intake tube in your vehicle with the help of the service manual. It bonds the air box to the throttle body together. Once you have found it, detach the vacuum hoses connected to it. These vacuum hoses have clamps, which can be removed with pliers. This time, locate the clamps of the cold air intake tube, and detach them from the stock air box with the screwdriver. Loosen and remove the hose clamps that serve as the connection of the cold air intake tube and the throttle body afterwards. You may now be able to remove the old tube of the cold air intake.
Removing the old mass air flow sensor and the stock air box
After the tube of the cold air intake system has been lifted away, it is time to detach the mass air flow sensor. This may not be applicable to some vehicles that are not equipped with this kind of sensor. Once you have a clear access to the stock air box, loosen and remove its bolts with a wrench. After that, you may now easily lift and remove the stock air box from the engine bay.
Securing the new air filter to the pipe of the cold air intake
This time, prepare the new air filter to be attached to the pipe of the cold air intake. Make sure that it is pre-oiled and has not acquired any damage. Once you have finished inspecting, you may now attach the air filter at the end of the cold air intake pipe. Use a hose clamp to fasten it securely.
Installing the rest of the cold air intake system
Check for the silicone coupling that is included in the cold air intake kit. Once you have found it, connect it to the end of throttle body with a hose clamp. On the other end of the throttle body, attach another hose clamp. This time, connect the cold air intake tube to the silicone coupling. And then going back to the second hose clamp you have attached to the throttle body, fasten it to the silicone coupling. You must also fasten the brackets of the cold air intake tube so that it will not move loosely. You may now connect the mass air flow sensor that you have assembled earlier into the cold air intake system.