How to Choose the Right Coolant Reservoir Hose
Just like the tubes in which the water system flows in every establishment, your vehicle also has a component that is responsible for letting the proper flow of coolant. This is your coolant reservoir hose. Imagine what a disaster it would be if this hose is missing in your vehicle. The coolant will have no definite direction! However, it can also wear out and be damaged over time. So if you want a new one, here are the things you must take into consideration in order to make the correct choice for your vehicle:
Which coolant reservoir hose should be used?
The basic types of coolant reservoir hose that are offered in the automotive market include the Original Equipment Manufacturer (OEM) and the aftermarket. For most modern vehicles, it is safe to pick an OEM type. This is because this type is made to be directly fit for your vehicle. On the other hand, the aftermarket type of coolant reservoir hose is made to be suitable for certain models of vehicles only. Hence, this type is usually limited.
There is also another type of coolant reservoir hose that is offered in the automotive market, which is the flex hose. It has a silicone rubber material, which is intended to be an alternative for OEM products. However, it is still safer to get an OEM replacement coolant reservoir hose as the flex type still needs to be modified for different vehicles.
In addition, it is recommended to buy a replacement coolant reservoir hose that comes with a package. This enables an easier installation, and it can also help you to guarantee that all the parts connected to the hose will be of the right size and compatibility.
What to look for in a coolant reservoir hose?
Your coolant reservoir hose can undergo extreme heat and pressure, so you must pick one that is durable and made from high-class materials. Hence, you will be able to rely on it for a long period of time due to its high resistance to premature wearing.
Also, you must always look for a coolant reservoir hose that is made by a trusted manufacturer. This can help you to be sure that you can get the best performance out of the product that you will be picking.
How to Replace Your Coolant Reservoir Hose
Durable and efficient - these two words can best describe your coolant reservoir hose. Without these qualities, it will not be able to transfer the coolant from one component to another. In addition, the toughness of your coolant reservoir hose prevents the coolant from leaking out of the system, and also allows the hose to withstand extreme pressure and temperature. However, your coolant reservoir hose can fail over time just like other components in your vehicle. Once this happens, you must know how to replace it immediately so that the coolant flow and transfer will not be affected. Here are the procedures that will surely help you:
Difficulty level: Easy
Items you'll need:
- Clean rag
- Siphone hose
- Drain bucket
- Fresh coolant
- Screw driver set
- New coolant reservoir hose
Step 1: Make sure that you have disconnected the negative ground cable from the battery terminal before proceeding with the installation process. Consider this as a safety measure.
Step 2: Let the engine cool down after at least one hour. This is because you need to drain the coolant from the system before removing your coolant reservoir hose.
Step 3: Look for the location of your coolant reservoir hose, and remove its spring clamps with pliers if there are any.
Step 4: By using a clean rag, hold and disconnect the hose from the coolant reservoir. If there is coolant leaking from the hose, let it go straight into the drain pan.
Step 5: You may now take out the remaining coolant with the help of a siphon hose and bucket.
Step 6: You may now attach your new coolant reservoir hose into place. To do this, clamp it on the radiator tightly to avoid any leaks.
Step 7: Install the other end of your new hose into the coolant reservoir. Make sure that all its bolts are lined up and secured properly.
Step 8: Fill the coolant reservoir with fresh coolant.
Step 9: Reconnect the negative ground cable to the battery terminal, and start the engine.
Step 10: Run your vehicle for several minutes to determine if there will be any leaks. Simply tighten the clamps of your new coolant reservoir hose if such situation occurs.