Select your vehicle
Refine by:

Shop Acura CSX Crankshaft Position Sensor

Showing 1 - 2 of 2 results
Sort by:
Crankshaft Position Sensor
Replacement
Part Number: REPH311814
Vehicle Info Required to Guarantee Fit
$14.54
Vehicle Fitment
  • 2007 Acura CSX Premium 4 Cyl 2.0L
  • 2007 - 2009 Acura CSX Touring 4 Cyl 2.0L
  • 2007 - 2010 Acura CSX Type-S 4 Cyl 2.0L
  • 2008 - 2009 Acura CSX Technology 4 Cyl 2.0L
  • 2010 Acura CSX iTech 4 Cyl 2.0L
Product Details
Condition : NewConfiguration : 3-Prong Blade Male Terminal; 1 Female ConnectorQuantity Sold : Sold individuallyWarranty : 1-year unlimited-mileage warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Crankshaft Position Sensor
Standard®
Part Number: SIPC376
Vehicle Info Required to Guarantee Fit
$84.33
Vehicle Fitment
  • 2007 Acura CSX Premium 4 Cyl 2.0L
  • 2007 - 2009 Acura CSX Touring 4 Cyl 2.0L
  • 2007 - 2010 Acura CSX Type-S 4 Cyl 2.0L
  • 2008 - 2009 Acura CSX Technology 4 Cyl 2.0L
  • 2010 - 2011 Acura CSX iTech 4 Cyl 2.0L
  • 2011 Acura CSX Base 4 Cyl 2.0L
Product Details
Condition : NewQuantity Sold : Sold individuallyWarranty : 3-year or 36,000-mile Standard limited warranty
Page 1 of 1 | Showing 1 - 2 of 2 results

Helpful Automotive Resources

P0022 Code: Intake “A” Camshaft Position – Timing Over-Retarded (Bank 2)
September 16, 2020
P0022 Code: Intake “A” Camshaft Position – Timing Over-Retarded (Bank 2)Diagnostic trouble code (DTC) P022 code stands for “Intake “A” Camshaft Position – Timing Over-Retarded (Bank 2).” It indicates that your car’s primary computer, which is often referred to as the powertrain control module (PCM), perceives an over-retarded or over delayed timing condition in Bank 2 of the intake camshaft. Code
P0308 Code: Cylinder 8 Misfire Detected
September 16, 2020
P0308 Code: Cylinder 8 Misfire DetectedWhat are the repercussions of this trouble code, and what can you do to remedy the problem? Read this short guide to find out more. The P0308 code indicates that the PCM has detected a misfire on cylinder #8. What Does the P0308 Code Mean?
P0339 Code: Crankshaft Position Sensor “A” Circuit Intermittent
September 15, 2020
P0339 Code: Crankshaft Position Sensor “A” Circuit IntermittentThe crankshaft position sensor is one of the most critical devices for engine management. It measures the rotational speed and position of the crankshaft. Then, it provides a critical data signal to the PCM to control parameters, such as ignition spark timing and fuel delivery.
P0336 Code: Crankshaft Position Sensor “A” Circuit Range / Performance
September 10, 2020
P0336 Code: Crankshaft Position Sensor “A” Circuit Range / PerformanceDiagnostic trouble code (DTC) P0336 stands for “Crankshaft Position Sensor “A” Circuit Range/Performance.” Code P0336 may be set when the PCM receives a signal from the crankshaft position sensor that deviates from specification.
P2187 Code: System too Lean at Idle (Bank 1)
September 10, 2020
P2187 Code: System too Lean at Idle (Bank 1)The term “bank 1” only applies in vehicles with V-engine and flat layouts. It refers to the side where the number 1 cylinder is located. Note that there is only one bank if your car has a straight engine.  The term “bank 1” only applies in vehicles with V-engine and
P0021 Code: “A” Camshaft Position – Timing Over-Advanced (Bank 2)
September 10, 2020
P0021 Code: “A” Camshaft Position – Timing Over-Advanced (Bank 2)Diagnostic trouble code (DTC) P0021 stands for “‘A’ Camshaft Position – Timing Over-Advanced (Bank 2).” It is triggered when the position of the intake camshaft in bank 2 is more advanced than what the powertrain control module (PCM) has set it to be.  Diagnostic trouble code P0021 is triggered
Copyright ©2020 CarParts.com, Inc. All Rights Reserved.
Terms of Use
Privacy Policy