Need a sturdy set of brackets to keep your vehicle's axle from bouncing around? Then be sure to install a quality Shock Mount in your car today
Rough roads ahead? Are you absolutely certain that your suspension system can take the beating this time? If even the slightest road bump makes your ride bounce and sway for long minutes, then you might want to take the smoothest and most bump-free route to your local garage to get a new Shock Mount for your car.
Your car's shock mounts may just be some of the most obscure yet highly useful parts of your ride. While we all know what shock absorbers are, few drivers actually know about the presence of their shock mounts and what they do for the vehicle's suspension system and ride quality. A Shock Mount is there to help enhance your ride's drivability. It reduces your car's uncontrollable movements, providing you with better auto handling. It also keeps your suspension and steering equipment aligned to reduce the chances of damage caused by excessive rattling and extreme friction. Aside from reducing vehicle vibration, a great set of shock mounts also helps improve your car's ride quality by dampening the dizzying bouncing movement of your car and eliminating the annoying, headache-inducing squeaks and rattles that come from your vehicle's chassis-now that's great ride quality.
Ensure that your vehicle is fit enough to travel through the roughest terrain by keeping your shock mounts in tiptop condition. If you experience excessive swaying or bouncing, take your car to the local garage to have it checked, then head online to buy the right replacement mount for your ride.
Dos and Don'ts of Buying Shock Mounts
Shock mounts are responsible for reducing vibration, structure-borne noise, and forces. Replace your damaged shock mount now before your car starts shaking like a wet dog. When buying a shock mount, there are a few dos and don'ts to keep in mind.
- Find out which shock mount is best suited for your car. Make sure you know its size and fit. The type of shock mount you should use will depend on your car's model, engine size, and weight.
- The most common types of shock mount are made from rubber and rubber-to-metal bonded anti-vibration mountings. Remember that your aim here is to purchase mounts that are able to eliminate harmful vibrations, noise, and shock.
- Check the other parts around the shock mounts and see if they need to be replaced. This might just help you save your car engine from further damage.
- Shop around and compare to see which among the brands give you the best fit and offer. Check the specs and features.
5 Steps in Installing Rear Engine Shock Mounts
Even the tiniest of parts play a huge role in making your car run. This is true, especially for the engine that relies on parts that help hold it in place. That is the purpose of engine shock mounts, which also protect the engine against excessive shocks and vibrations when the automobile is running. And since powerful forces cause engine shock mounts to get damaged, we might need to install new ones.
Difficulty level: Moderate
Tools that you'll need:
- Jack stand
- Socket set
- Shock mount kit
- Appropriate wrenches
Step 1: Secure your car on jack stands. After this, open the trunk and remove everything inside. Pull back the molded carpeting in the trunk and unbolt whatever fasteners hold it down. Detach the two nuts that hold the rear shock mount to the chassis.
Step 2: Uncouple the rear shock where it attaches to the rear trailing arm. Remove the entire assembly from the car and disassemble it on your workbench.
Step 3: Install an aftermarket rear shock mount kit. This kit replaces the rubber inner bushing with a polyurethane bushing that is much stiffer and far more secure than the stock mount. Installing the aftermarket kit is very similar to installing the stock mounts.
Step 4: Reuse the plastic dust cover and the two concave washers from your old shock. Use new self-locking nuts on top of the shock, and attach the rear shock mount to the chassis. Seal the base of the shock mount to the chassis with a new gasket.
Step 5: Install the new shock mount and replace the rubber boot on top. Reattach the shock at the bottom, and reinstall any speakers or carpet removed.
Tip: If you find your chassis sheet metal torn around the mounts, there are factory retrofit parts that can be welded into place to repair the metal.