Select your vehicle
We do not have any compatible Flywheel Shim .

Flywheel Shim Guides

Choosing the Right Flywheel Shim

The flywheel shim protects your flywheel from the daily wear and tear with carbon steel covers that guarantee a long-lasting flywheel performance and the best value for your money. The flywheel disc is an essential part of steering as its job is to maintain the vehicle's angular velocity. In order to protect it from wearing, the flywheel shim was invented. The shim covers the outer layer of the flywheel disc which is the one in frequent pressure and friction.

Why buy a flywheel shim?

Car part replacement and maintenance normally cost you a lot of dough. Replacing broken parts make it hard to save up on cash but leaving it broken is not an option as well.

One way to get a hold of great savings is to purchase a flywheel shim. Your car's flywheel disc endures a lot of pressure due to its responsibility to maintain the vehicle's angular velocity and so it's usually one of those car parts that wear out easily. You can avoid purchasing a new flywheel if you check it on a regular basis, and of course, if you buy a flywheel shim.

Buying a new flywheel shim gives you the opportunity to get great savings by not purchasing a new flywheel whenever the outer layer wears out. If you buy a flywheel shim, you can be sure of driving for years without a single scratch on your flywheel disc.

What is the ideal flywheel shim?

The ideal flywheel shim should be made of tough material such as carbon steel or metallic alloys. It should be able to absorb friction and pressure and protect the flywheel disc at all costs. While it should be tough, it should also have a direct fit on your car's flywheel disc as shims that aren't snugly fitted might get dislocated while driving.

What flywheel shim should be used?

It is highly recommended that you buy a flywheel shim for your car's flywheel disc, unless you're happy with a broken car part. It's generally safe to choose Fidanza or Bilstein as the two are the leading manufacturers of high quality carbon steel shims. In addition, these brands offer a strong warranty deal together with custom fitting services to perfectly match the shim to your car's flywheel disc.

Always trust the leading brands as they don't become industry leaders for no reason.

4 Simple Steps to Install a Flywheel Shim

Do you know that the flywheel can release energy greater than what the engine can produce? The flywheel serves as a source of continuous energy whenever energy source from the engine is intermittent. In addition, the flywheel sustains the vehicle’s angular velocity which entails great pressure and friction applied to the outer layer of the disc. Flywheel shims function as your flywheel’s protection gear. The flywheel shim is usually made of carbon steel and metal alloys to prevent the friction from wearing the disc’s outer layer. Worn out flywheels can deliver insufficient energy transfers, and can only hold a minimal amount of energy. With worn out flywheel discs, you might have trouble with engine startup, or intermittent energy supply. To prevent your car’s flywheel discs from wearing out, install a compatible flywheel shim by following the steps we enumerated below.

Difficulty Level: Moderate

Tools you’ll need:

  • Shim kit
  • Auto ramps
  • Adjustable wrench

Step 1: Drive your car onto opposite ramps aligned to the wheels until you reach a steady elevation. Set the parking brake before getting of the vehicle to prevent accidental sliding.

Step 2: Slip in under the car and locate the flywheel disc near the starter. Detach the flywheel inspection plate with an adjustable wrench moving it to a counterclockwise direction.

Step 3: Once the flywheel is visible, loosen the mounting bolts without taking them off. Use an adjustable wrench to do this in a counterclockwise direction. The bolts do not need to be removed as the shim is notched. Note: Read the manual that came with the shim kit as other car makes require minor adjustments in endplay to account for the shim’s additional thickness.

Step 4: Tighten the bolts to hold the shim in place. Re-attach the flywheel inspection plate back with an adjustable wrench, but this time in a clockwise direction.

Safety Tips

  • You can use jack stands in exchange of ramps for a tighter hold and greater clearance.
  • Wear gloves and eye protection gear.

Copyright ©2020 CarParts.com, Inc. All Rights Reserved.
Terms of Use
Privacy Policy