Ford F750: Preventive Maintenance
Even a tough work truck like the Ford F750 has its downfalls, just as Goliath has its David. But even if there are a lot of threats lurking around as the vehicle ages and accumulates more miles, the truck can still be a reliable utility vehicle if you can give it the time and attention it needs. Regular preventive maintenance is your best weapon against breakdowns and other risks. There's a long list of things to do for your vehicle, but let's start with the basics. These simple maintenance checks and activities will help prevent extensive damage and costly repair:
- Know how to check the fluids.
By learning how to check on the vehicle's engine oil, coolant, and other fluids for the transmission, brake system, and power steering, you can spot troubles early on. You'll know if the fluid level is too low or if it's already time for oil change or fluid exchange. This will save you time and money. By changing oil at regular intervals, the engine can run more smoothly. And by replacing contaminated fluids, different auto systems can function with greater efficiency and less stress. Changing the fluids can be tricky. And if you don't have the tools and automotive know-how, this is best done by experts. However, checking on them can be fairly simple even for a beginner. The vehicle manual can walk you through the whole thing. This will help you locate the parts to be checked and inform you of the specs and requirements.
- Take time to inspect the belts.
Even if everything seems fine, every once in a while, check the condition of the belts under the hood. You shouldn't just wait for them to snap or break all of a sudden. If there's glazing or cracking, then this should be a cause for concern. Know when belt replacement is due for your vehicle. But even before it reaches that point, at least take a look at it. Replace it if it's already loose or about to get torn. A damaged belt can mess up with other parts and systems and can ruin them.
- Learn the basics in battery care and maintenance.
Check your battery. The cables, terminals, and contacts may need cleaning to get rid of corrosion and mineral deposits. A post cleaner can be used. Another alternative is a mixture of baking soda and water. The water/electrolyte level should be monitored as well. If needed, this should be refilled with clean distilled water. Just make sure that you won't overfill the holes. Some battery test tools can also be used to determine the charge and condition of the battery. Take note of the purchase date and the battery's expected service life, so you'll know if it's time to replace the battery.
Filters keep dirt and other contaminants from infiltrating the system. However, as these filters trap dirt, they can eventually get clogged. This compromises their filtering capacity and ability, allowing harsh elements to get through. To prevent damage and wear, don't forget about the filters.