The falcon is swift, precise, and incredibly efficient as it travels from one place to another, which comes as no surprise that Ford named one of its cars after it. The Ford Falcon was a compact car that was produced from 1960 to 1970 to much success. The Falcon came in varying body styles, including two-door and four-door sedans, two-door and four-door station wagons, convertibles, two-door hardtops, a sedan delivery, and even a pickup truck. The Falcon sedans and station wagons made for superb family vehicles, thanks to their reliability and handling. Plus, these rides were also very stylish due to their fatless, sleek bodies that did justice to their name.
The Ford Falcon is an instant classic, and just looking at it will bring about memories of the 60s or of old movies at the least. With such a prized gem in your midst, you'll want to keep your Falcon as well taken care of as possible. This can be done through regular oil and gasket changes, tune ups, and the like. These routine maintenance jobs are easy to stick to, but you'll also have to deal with the occasional busted auto parts. These are the vehicle parts that have succumbed to wear and tear and have begun performing poorly. When you have such components in your ride, you better have them replaced with new Ford Falcon parts right away.
The great thing about the Falcon is that you can still find replacement parts for it even 40 years following its discontinuation. Even if you're looking for specific 1966 Ford Falcon parts, most online stores are bound to have them. These spare components are offered as either aftermarket or OEM, both of which presenting their own respective benefits. Aftermarket parts are relatively more affordable and can actually outperform your stock parts. On the other hand, OEM parts are more durable and guarantee a perfect fit for your vehicle. You have tons of options to choose from when it comes to properly maintaining your ride. So don't hesitate to buy your Falcon the parts that it needs ASAP.
Why do my Ford Falcon's brakes slip and grab? What should I do with the grabby brakes of my vehicle?
Oil, grease, or brake fluid may have found its way into the brake pads. As a result, there could be jerk-like sensations when the brakes are applied. If you have grabby brakes, then you have to check the brake pads. See if there's a trace of unwanted fluid coating them. Once you've confirmed that there's fluid on them, then the next thing you should do is find the source of the leak. Check the brake caliper for wear and look for other possible leaky components. Grabby brakes may also be blamed on scored drums/rotors. To fix uneven braking due to wear on the rotors/drums, you may have to resurface them to restore the parallel and smooth surface. If they've been turned several times or they're already deeply grooved, might as well just replace them.
How can I tell if the Ford's cabin air filter needs replacements? I'm not sure what signs to look for.
Check the vents to see if the airflow is still normal or have weaken. Weaker airflow is an indication of a faulty cabin filter. The filter may already be filled with dirt and clogged, affecting the airflow. If you notice any change in air that's circulating around the cabin, like the quality of air has noticeably changed, then you must check the filter. It may no longer be screening out dirt as it should. Replace the filter if it's broken, clogged, or defective.
I tried cranking up the engine, but to no avail, the vehicle won't start successfully. It won't run fully. What could be a possible explanation to this?
The engine fails to crank up and run fully probably because the spark isn't enough to start the vehicle or fuel is insufficient. You have to consider more than a few possible causes here. The ignition timing may be off or there's a problem with computer control or compression. Check up the engine to reveal the real problem. Proper diagnosis will lead to the proper solution.
How will I know if the fuel filter of my Ford is already due for replacement? What are the signs of a bad filter?
You can usually tell through engine performance. If the filter no longer works well, the vehicle might sputter and drag. It may also lose or lack power. The fuel mileage will suffer as well. Problems may range from drivability issues to other things. If you don't replace a bad filter, the fuel system components of the vehicle might be affected and might get damaged. Take for example the fuel injector. It may get clogged with debris, dirt, and other harsh elements. As a result, fuel delivery will be botched up. The engine may not be fed with enough fuel to run smoothly. If the filter is already clogged or filled with dirt, don't ignore it. Have this replaced or fixed as needed. For preventive maintenance, consult the vehicle manual for the suggested service and maintenance schedule.