GMC R1500 Maintenance Tips: What You Can Do To Keep Your Truck Running Smoothly
When you bought that GMC R1500 truck, you were probably thinking about how much performance it can give you and how it can help you when it's time to tow something. You don't have to worry anything about that; every GMC vehicle that rolls out of the factory comes equipped with a powerful engine and reliable towing capability. But, in order to keep your R1500 that way, you must do your part too. Taking care of your vehicle the right way can make the difference between owning a long lasting, reliable truck and a rusty, broken down junk. Below are some tips on how to go about the upkeep of your GMC R1500:
- Check and change the oil regularly.
Nothing will destroy an engine faster than not having proper lubrication. Imagine all the internal moving parts inside it grinding against each other. That is what will happen when the engine doesn't have enough oil. Therefore, it is a must-do maintenance step to always check the oil level. The oil should also be relatively clean after running through the engine. Know when it's time to change the oil and the oil filter. You can follow your auto manufacturer's recommendation for this. If your truck is equipped with oil life monitor, it will tell you when it's time to change the oil.
- Take care of your truck's cooling system.
You need to flush the cooling system and change the coolant. Flushing the cooling system is usually done every 2 years. If you have green or red antifreeze, its corrosion protection will be used up in two years. It will be contaminated by rust and scale by then which could clog the cooling system. Therefore, you need to drain the coolant and replace it with a new one. The rule of thumb is to have a 50/50 mix of coolant and distilled water in the cooling system. This should be enough to keep the system functional and prevent corrosion and deposits from building up.
- Change the transmission and differential oils at proper intervals.
These two fluids do not need frequent servicing but you still have to keep in mind the proper intervals at which you need to have it serviced. The transmission fluid is responsible for transferring energy from the engine to the wheels to get your vehicle running. It also lubricates, cleans and cools the inside of the transmission. Eventually, the fluid becomes dirty or decreases in level. You need to either refill or replace the fluid depending on what's necessary or you'll experience transmission failure. The differential fluid makes the differential function and work in sync with the transmission. When you replace any of these fluids, make sure to use only what's recommended. Check your owner's manual for the gear oil type and viscosity that your truck needs.
- Lubricate drive components properly.
Every moving part in your truck needs grease or proper lubrication to survive. The ball joints, u-joints and bearings all work under intense heat and pressure to keep your engine running. Without proper lubrication, these integral parts will grind against other parts and get worn. Severely worn joints and bearings can cause engine problems such as overheating.