Closer Look at Honda Grille Assembly
The Honda grille is designed to allow a flow of air into the engine compartment of the vehicle, to provide the air necessary to give the engine the oxygen it needs for the combustion process, as well as to aid in engine cooling. While it allows the free flow of air, the Honda grille also has the job of protecting the engine compartment from rocks and debris, keeping them from entering the engine compartment to cause damage to the many delicate working parts that it contains. The Honda grille takes a lot of everyday punishment in its position, right at the tip of the vehicle front-end, often pelted by rocks and debris kicked up by surrounding traffic as you drive. This day-to-day damage can cause loosening or breakage, or the Honda grille can become vulnerable to corrosion in the areas where it has been struck by debris to damage its finish. When the Honda grille becomes damaged, installing a new one promptly can save expensive damage that can be caused by the intrusion of debris into the engine compartment. If you have the need to replace the Honda grille, the standard replacement is easily available, but there are many great custom styles available also, able to give your vehicle a new look. The Honda grille is right at the front of the vehicle, the first impression of your vehicle as it comes down the road, making it a great place to add stylish custom accent to your vehicle. Whether looking for a simple replacement or a custom upgrade, the selection of quality Honda grill replacements in our online catalog is a great place to find what you need at a great price. Our secure site will make ordering your Honda grille safe and easy, and our toll-free phone line can take your order just as efficiently.
How to Fix a Broken Honda Grille Assembly
Being in the forefront of your vehicle-literally-the grille assembly is prone to getting scratched and damaged. Although these protectors are made from high-quality materials that are built to last, it is inevitable that, at one point or another, they will succumb to wear and tear. It is important that you know when to take action before it gets you in an accident. Why? A broken grille can fall off the road and cause various accidents. Before this happens, you need to replace your Honda grille assembly with a new one, or you can just fix it. Here's an easy step-by-step guide that you can follow.
Difficulty level: Moderate
What you'll need:
Step 1:Park your vehicle in a shady area before you start with the repair. This is to ensure that you will not rush the repair just because the weather condition or the temperature is not right.
Step 2:Remove the screws from the grille using a screwdriver. Examine the mount area from under the car if it is in good condition. Check if they are easily accessible.
Step 3:Prepare a ¼ black thick Plexiglas and cut a strip about an inch wide once you've confirmed that the mounting holes are accessible. Next, clean the bottom of the grille where the tabs used to be using a mild soap and clean cloth.
Step 4:Mount the grille in place on your vehicle. Make sure that it is at the center and aligned in all sides. You can mark the area using a non-permanent marker to ensure that it will be at the correct position.
Step 5:Cut two tabs from the Plexiglas strip, and then divide it into two tabs. You should come up with two tabs that are about an inch long. Using sandpaper, scratch one of the edges clean and coat it with an adhesive. You can use superglue for plastic.
Step 6:Go beneath your vehicle and stick the tab through the slot and onto the grille. Keep it on for at least 15 seconds. Do the same with the other tab.
Step 7:For the center part, glue two pieces of the tab material to make it thicker. Glue it onto the grille as well. Leave them on for at least five minutes.
Step 8:After the tabs have dried, remove the grille from your vehicle. Use a plastic epoxy that is specifically made from plastic repairs, and then form a fillet-shape around the base of each of the three tabs where they coincide with the grille. This is to reinforce the grille and keep it from falling.
Step 9:Once the tabs are hard enough, you may file, sand, and drill the pieces back on the Honda grille assembly. It would take you at least 15 minutes to put this together and ensure that they will remain intact. Take your vehicle for a short ride to ensure that it will not fall off.
And just like that, you just saved your money from buying a new replacement Honda grille assembly. This repair can only do so much; you always have the choice whether you will invest on a new one or keep repairing it by yourself.