Car won't start? Start your car easily with a simple turn of a key when you invest in a great Ignition Lock Assembly or Ignition Key Lock Assembly today.
Your engine runs numerous processes, from calculating air-to-fuel ratios to determining the perfect camshaft stroke. But all of these processes start from something simple: inserting the keys into the ignition lock assembly. This step triggers an ignition system process that generates thousands of volts, which are supplied to the spark plugs to start the car. This process also supplies electricity to numerous electrical components.
The ignition lock cylinder assembly is where the key is inserted in order to start the vehicle. It acts as a switch and an anti-theft device at the same time. Since this is where the whole ignition process starts, it's essential to keep this component in top shape. A damaged ignition lock will prevent you from starting the engine, and who would want that? So, when you see signs of wear or malfunction, don't beat around the bush, have it inspected and replaced if necessary.
Everything in the engine begins in this assembly. Simply put, you can't start your car without a functioning ignition lock assembly. So, before you think about getting the latest upgrades, make sure your car can start. After all, turbo kits and superchargers will count for nothing if you can't start your car.
Ignition Lock Assembly Replacement
Finally, a component that's easy to replace. Well, most DIY jobs don't require much more than some proper tools and elbow grease, but this is one repair job that you'll certainly have no sweat doing. Why is it important to replace your ignition lock assembly? Well, elementary dear Watson: it's so that you can turn on your engine and vehicle appliances without any problems, that's why. When your stock iginition lock assembly gets worn out, it could impede your ability to turn on your radio or lights when the engine is off, and prevent you from turning on your engine all together. Luckily, you can easily swap that busted old thing for a brand-new one. Just follow these simple steps and you'll be rocking that new ignition lock assembly in no time.
Difficulty level: Easy
Things you will need:
- Protective gloves and glasses
- Adjustable wrench
- Paper clip
- Replacement ignition lock assembly
Step 1: Like your mama told you back in pre-school, "better safe than sorry!"So heeding your mama's words, we recommend you put on some safety goggles and gloves before beginning your DIY job.
Step 2: Open the hood and remove the negative battery terminal by turning its clamp counterclockwise using the adjustable wrench. Make sure that the cable is placed aside and away from the battery once it's detached.
Step 3: Insert your key into the ignition and turn it to the "accessory" position.
Step 4: Straighten out a paper clip and stick its one end into the bottom part of the key slot.
Step 5: Hold the paper in place while simultaneously turning the ignition key back to the "off" position.
Step 6: Pull the lock cylinder out of the ignition switch and throw away the paper clip.
Step 7: Place your key into the new ignition lock assembly and insert the assembly into the ignition switch cavity. Turn the key to the "accessory" position and then back to the "off" position in order to secure the cylinder into its fixed position.
Step 8: Reconnect the negative battery terminal and tighten the clamp in the clockwise direction using the adjustable wrench.
Step 9: Close the hood, and you're all set to go!