Useful Tips When Buying a Light Kit
Cars are continuously evolving. Every now and then, a new technology or car accessory is introduced to the public. These innovations are actually good, although sometimes, they send confusion to car owners. Because of these various advancements that were developed over a short period of time, even a simple task such as buying a light kit has become a challenge. To stop this confusion, all you have to do is to read some of these reminders and tips. These are some of the things that you need to watch out for when buying a light kit for your car.
The right color for the right purpose
- Car lights are used by the driver to communicate or send warning signals to other drivers. A vehicle has several lights and each light communicates a corresponding warning signal. Here are some examples:
Red- indicates emergency. When the vehicle comes to a halt, these signals light are used. Red lights are commonly known as brake lights, and almost all cars have them.
Amber or yellow- denotes that the vehicle is moving slower than the others on the road. These lights are necessary among tow trucks. These are used to tell the other drivers that they need to slow down.
- The corresponding meaning of each light color is set according to laws and regulations of a country or state. Before buying a light fixture, verify first if it is allowed to be used in the area where you're living.
- Signal lights can never be used interchangeably. Use the lights according to their specific intended purpose.
The right light kit for the right car
- There is an appropriate light kit for every car application. Setting up lighting accessories is a popular car enhancement procedure.If you want to improve your car's look by adding light fixtures, you can buy accessory lamps. One good example is the truck roof light kit. It is installed on the truck's roof for a more rugged appeal.
- When the light kit components fit in your vehicle flawlessly, it means that the kit you bought is the right one. A light kit must be compatible with the car's requirements or else, it won't work. These requirements include the right size of the bulbs and sockets, the accurate number of wire connectors, and the proper location in the car where the light assembly should be placed. Always make sure that the parts inside the light kit meet your vehicle's requisites.
How to Set Up a Light Kit on Your Truck
To enhance your truck's look, try setting up a lighting system on its roof. If money is your biggest dilemma, you don't have to worry because light kits are very affordable. Moreover, the installation procedure is very easy to pull off. Even a beginner DIYer can do it. You don't have to pay a mechanic or a technician to do this for you. So if you're ready, here are the steps on how to mount a light kit.
Difficulty level: Moderate
- Flat tip screwdriver
- Phillips screwdriver
- 1/4-inch drill bit
- 1/2-inch hole saw
- Soldering iron
- Electrical tape
- Tape measure
Prep the truck before the installation:
Step 1: You must remove all components that are attached to your truck's headline; this includes the visors and lights. The headliner must be taken out as well, if your truck has a built in sunroof. The headliner is fragile so be careful in dismantling it from the sunroof. The safest way to do it is by removing the four trim pieces, which you can access from the truck's interior. The headliner slides off from its mounting once the trims are out.
Step 2: On the roof, create a layout or a set-up plan that marks the exact spots on the roof where the lights will be installed. Use a tape measure to determine the dimensions. Label the corresponding spots with masking tape.
Step 3: Start making holes using a drill. Drill through the masking tape to avoid chipping the paint.
Step 4: Take the switch access panel used to control the headlight. You can find it at the side of the steering column. Take the steering cover by prying its edges using a flat tip screwdriver. Take headlights' wire connectors; this is a black cable with yellow stripes on it.
Installing the lights:
Step 1: Mount the light template on the roof. Align the roof holes with the holes on the template.
Step 2: Insert the bulb holders through the holes and tighten the bolts to secure them on the template.
Step 3: Attach the bulb sockets to the bulb holder, and then place the bulbs on the sockets.
Step 4: Place the lens covers on top of the light set up. Do not tighten the bulbs yet.
Step 5: Connect the lights' electrical wirings to the electrical system of the truck. Run the wires down to the glove box.
Step 6: Get the fuse lead in your light kit and install it in the fuse box.
Step 7: Take the headlight cables and the wires from the lighting set up on the roof. Splice the ends and connect them with a soldering gun. Cover the connections with electrical tape.
Step 8: Tighten all the bulbs on the sockets. Apply the gaskets around the lighting fixture to ensure proper sealing against water. Tighten lens cover screws.
Step 9: Reverse the procedure to put all the components back into the truck.