Toyota Tacoma Nerf Bars Maintenance: Some Tips to Keep in Mind
Nerf bars are usually made tough to complement the power and robustness of the truck they are fitted in. But that doesn't mean these add-ons can take care of themselves and can last for many years even with zero maintenance. With its task and location in your truck, this component is exposed to all sorts of damaging elements particularly those that you'll find off road. So if you want to get the most out of your Toyota Tacoma nerf bars and add more years to their service life, you had better provide them with the kind of maintenance they deserve. Here are some tips that will help you achieve that:
- Don't ignore a cracked or damaged nerf bar pad.
While washing your nerf bars, pay attention to the rubber pad that you step on every time you get into and out of your truck's cabin. Is it still in good shape? Does it have enough grooves that ensure good friction between the pad and your footwear? If the pad now has cracks and there are times when you slip as you set foot on it, then you should have your nerf bar pad replaced with a new one. Delaying the replacement may cause injury on your passengers. What if they lose footing and trip badly? Aside from that, a cracked or torn pad also takes away from the nerf bar's otherwise handsome looks. So, as soon as the rubber pad becomes damaged, have it replaced the soonest.
- Deal with rust the soonest possible time.
Your Toyota Tacoma nerf bars are susceptible to rust because of their location in the vehicle and the kind of environment you usually drive your truck in. So if during your inspection you notice that rust is starting to eat up a small portion on the underside of the nerf bar, deal with it right away to prevent it from getting worse. You may need to take the nerf bar off the truck to completely get rid of the rust using a naval jelly or rust dissolver. For thick rust, you can go for a rust-fixative primer.
- Give your nerf bars a good shine by polishing it from time to time.
If your Tacoma nerf bars are made from stainless steel, you can restore their luster and good looks by polishing them. You can do this without taking them off the truck. You just have to make sure the nerf bars are clean and completely dry before applying the polish through a buffering pad or a soft cotton rag. You can repeat the process to achieve your desired shine.
Things to Keep in Mind to Install Your Toyota Tacoma Nerf Bars with Ease
The Toyota Tacoma is built for action. It is built tough inside and out and is capable of hauling cargo and negotiating even with the harshest of terrains. Since this is no lowly and small vehicle, passengers may need an extra lift to conveniently climb into the truck's cabin. That's what the nerf bars are for. Toyota Tacoma nerf bars can be installed on both sides of the truck to provide vehicle occupants with secure footing should they need to get into and out of the truck's interior. A practical addition to your ride, the nerf bars can be mounted in place even without a pro's help. Here are some tips to help you pull off the DIY installation:
Tip #1: Ask a buddy to help you with this DIY task.
This DIY installation can become a whole lot easier if you have someone to lend a helping hand. Since this add-on is a bit long and will be bolted on the vehicle's frame, you surely will need someone to hold one end of the nerf bar for you while you are working on the other end. With an assistant you can avoid alignment problems and doing adjustments over and over again.
Tip #2: Test fit your new nerf bars and while at it, find out if your Tacoma have pre-drilled mounting holes.
As soon as your ordered nerf bars arrive at your doorsteps, it would be wise if you take them out of the box and inspect them for shipping damage and missing or wrong hardware. If they seem to be perfect and your truck is clean, you can test-fit the nerf bars right away. By so doing, you'll know immediately if the ones delivered to you are of perfect fit for your ride. This will also help you determine if you need to make mounting holes or if the pre-drilled holes in your Tacoma are enough.
Tip #3: Do not bolt the hardware too tightly unless you're sure of the nerf bar's alignment and are now ready to finish the installation.
During installation, it is a good idea to just insert the bolts finger-tight on the early part of the process. This way, you'll have rooms for adjustments especially on the alignment of the nerf bar. Once you're sure that it is properly aligned and you're now on the final part of the installation, that's the only time that you should securely tighten the mounting hardware.