The Right Power Steering Filter for Your Car
Most of us take our car's power steering system for granted. We only pay attention to its maintenance when it's getting harder to steer the steering wheel. To keep your power steering system in great condition, one of the things that you'll need to replace would be the power steering filter. Just like any filter, it blocks out debris and impurities so that they won't hamper the performance of your car's components, which in this case will be your power steering system. Most manufacturers advise motorists to replace their power steering filter every 12 months, so it's best to get one now so you could get yours changed ASAP.
Filters in all shapes and sizes
Just like air filters, power steering filters come in all shapes and sizes, so it's important that you get one that is compatible with your vehicle's power steering system. Older vehicles typically use a mechanical fluid filter that uses cotton waste or filter paper to block out particulates in the power steering fluid. These filters often come as a rectangular cartridge or a round removable filter that you simply swap in and out from the power steering system. However, most modern vehicles are now using magnetic filters that use magnets to remove particles from the power steering fluid. These on the other hand have to be replaced entirely whenever you're flushing or changing your power steering fluid from the system's reservoir.
Check your car's manual today
We highly recommend that you check your car's manual to determine what kind of power steering filter you'll need. Because of the variety of shapes and designs in power steering filters, it's best to stick with a product that is specifically made for your power steering system. You can't go wrong when going for an OEM power steering filter, as they'll fit perfectly inside a compatible vehicle. Depending on the shape and size of a filter, prices can range from as low as $5 to as high as $50.
How to Replace Your Power Steering Filter
To keep things clean, one of the parts that you'll need to replace from time to time would be your vehicle's power steering filter. Keeping your power steering fluid clean and free from debris will allow the power steering system to perform better and have its parts last longer. The power steering filter is quite easy to remove and replace, so you won't need to visit a mechanic or car repair shop to help you out. Just follow our short guide and you should be able to replace it like a pro in no time. Do note that you'll need a friend to start and stop the engine when you're draining your power steering fluid.
Difficulty level: Moderate
What you'll need
- Safety goggles
- Empty cans or containers
- Needle nose pliers
- Cloth or rag
- Power steering fluid
- Power steering filter
Step 1: Put on some safety goggles and crawl underneath your vehicle to locate the power steering filter. You may need to browse through your manual to help you locate the filter.
Step 2: Clean the area around the power steering cover with a rag before you remove it carefully.
Step 3: Find the return rubber hose near the power steering pump and disconnect it by unscrewing the clamp and pulling the hose away from its fitting.
Step 4: You'll need a friend to start the car so you could drain the power steering fluid from the pump. Once the car has been started, the power steering pump should drain all the fluid from the reservoir. You should catch the fluid in a small can or container and dispose of it properly. Stop the engine when you no longer have a steady stream of fluid coming out.
Step 5: Once you've drained all of the fluid, you'll need to remove the spring clip holding the power steering filter in place. Use a pair of needle nose pliers to carefully push it out. Be careful as the clip could fly off since it is under tension.
Step 6: After you've removed the spring clip, you'll need to remove the round plate cover before you can access the power steering filter and remove it from its mount.
Step 7: You'll need to make sure that the power steering fluid reservoir is clean with fresh fluid, so you'll need to flush it a few times.
Step 8: Reconnect the rubber hose to the power steering pump and replenish the reservoir with new fluid.
Step 9: Have your friend start the engine again to flush out the reservoir. Continue this process a few more times until you are satisfied that the power steering fluid is clean. Turn off the engine when you're done.
Step 10: Install a new power steering filter into place, reattach the round plate cover and spring clip.
Step 11: Fill up the reservoir with enough power steering fluid, then place the power steering cover back into place and you are done!