Select your vehicle
We do not have any compatible Sound Bar .

Sound Bar Guides

Dos and Don'ts of Buying a Sound Bar

You're driving through the rough trails and you're trying your best to stay focused, but then again, you sense that there's something missing-your own soundtrack. Do you want to venture into the rocky road with your very own music playing in the background and kind of giving you a The Fast and the Furious feel? If you're sound system won't suffice, then you better get a sound bar. If you're not sure what kind to buy, then here's a guide to help you choose one!


  • Find one that's available with up to six speakers for powerful, hi-fi sound. Since you're upgrading your sound system, you might as well purchase one that has louder audio. This way, you'd be able to hear the music even when you're driving with your top down.
  • It's a good idea to buy a new sound bar that matches the style of your vehicle. If you have black interiors, get one that comes in a black finish. But if it's not available in your color of choice, then feel free to pick colors that complement the insides of your automobile.
  • Buy one that comes with 200-watts of power.
  • Find a sound bar with at least a 3-month warranty so that in case you find defects, you can immediately have it replaced without difficulty.


  • Don't buy secondhand sound bars. You don't know how it was used. Purchase a brand new one instead.
  • Don't go over old scrap parts in your local salvage yard. These components have been exposed to different things and you wouldn't want to take the risk and mess up with your sound system.

With this guide, you can now drive to your own soundtrack with a sound bar. Just keep these tips in mind and you're all set to find a new one. Good luck!

How to Install a Sound Bar on a Soft Top Jeep

Installing a sound bar is perfect for vehicles with the roller bar including Jeeps. Adding this to your ride will not only give you an improve performance on your sound system, but will also enhance the overall appearance of your vehicle. There are lots of available sound bar selections in the market. All you have to do is to choose the best for your vehicle. Here's a guide on how to install a sound bar.

Difficulty level:Moderate

Things you'll need:

  • Sound bar
  • Wire cutters
  • Speaker wire
  • Rubber gloves

Step 1: Being alert and watchful of your surroundings while doing this DIY job must be well-observed. Make certain that your vehicle is parked in a safe place so that you can work on the sound bar comfortably. Be sure that all the tools and materials are gathered in your working area so you won't leave your belongings unattended.

Step 2: Wearing rubber gloves will help you protect yourself from injuries, so we recommend you to use them for protection.

Step 3: Do not start your engine. Properly disconnect the negative cable from the battery to avoid electrical damage that might crop up during the installation process. Ensure that the positive cable will not touch any metal part.

Step 4: Remove the soft top of your Jeep so you can get a hassle-free access to the roll bar. Doing this will give you a larger workspace during the installation.Put the soft top in a secure location to avoid ruining it unintentionally.

Step 5: You need to put away the padding that surrounds the roller bar. Do this by unfastening the Velcro that keeps it in place.

Step 6: Using the mounting brackets, carefully mount the sound bar to the center support of the roller bar of your Jeep (according to the manufacturer's specifications. Sometimes, the brackets do not fit in the factory-drilled holes. If this is the case, you need to drill in new holes.

Step 7: Remove the stereo from the dashboard carefully. Read the manual if you are not certain on how to do this on your vehicle model.

Step 8: Link the speaker wire to the sound bar. Make certain to follow the instructions provided.

Step 9: Using your wire cutters, get rid of the protective coating around the wire. This will give you better connections.

Step 10: Carefully route the speaker wires to the stereo. If you want to make the wire not so visible, then route it through the roll bar and beneath the carpeting.

Step 11: Now, link the speaker wire to the back of the stereo carefully. Check the wiring diagram for more detailed information.

Step 12:You may now put back the negative battery cable.

Step 13: Start your engine.

Step 14: Turn on the radio and check if the sound bar is working properly.

Step 15: Place the soft top back in its place.

Mounting a sound bar in your vehicle is not as hard as it seems. It will only take you an hour or two, depending on your DIY skills. Take note that you may use an amplifier to increase the volume levels if the road and wind noise will still overpower the sound bar.

Copyright ©2020, Inc. All Rights Reserved.
Terms of Use
Privacy Policy