Safety, Shipping, Service
In the face of COVID-19, we remain committed to you.
Select your vehicle
We do not have any compatible Hyundai Tucson Splash Shield .

Hyundai Tucson Splash Shield Customer Reviews

Purchased on undefined

Hyundai Tucson Splash Shield Articles

Top Hyundai Tucson Splash Shield Issues and Their Causes

Splash shields, also known as mud flaps or splash guards, are attached to your Hyundai Tucson to protect its paint and parts from water, mud, and other road debris. These splash guards come in different shapes and sizes depending on where they are meant to be attached. Some splash shields are for the engine block, while others are meant to shield the brake assembly and the wheel wells. Although these protective accessories effectively defend your Hyundai Tucson's undercarriage, they are not capable of completely protecting themselves from wear and deterioration. Here are some of the most common signs of Hyundai Tucson splash shield problems and the reasons behind them:

Rattling noise

Splash shields are attached to your Hyundai Tucson through mounting brackets and bolts. Probably due to road bumps and other factors, these screws tend to get loose after some time. When these bolts loosen and fall off the assembly, the splash shields start to move freely under the vehicle. Their non-stop flapping produces an annoying, rattling noise, which can be very distracting and embarrassing for the driver. If you are having this problem, you can just tighten the screws to stop the splash shields' noise-producing movements. But if the mounting bolts are lost or are already damaged, you need to replace them with new ones. Replacement screws for the splash shields are very cheap, and they can be bought in any car accessories store or in your local hardware store.

Rust and corrosion

Rust accumulation and corrosion is actually normal for your Hyundai Tucson splash shields, especially for those that are made from metal. The reason behind this is actually very obvious-they are subjected to very harsh environments, which involve varying temperatures, flying road debris, and splashing water and/or mud. The bad news is that all these factors are known to promote rust buildup and speed up corrosion, and the irony is that your splash shields cannot shield themselves from these corrosive elements. The only thing you can do about this is to clean them as often as you can and apply some rust-prevention chemicals on their surface. If your flaps or shields are already infested with rust, try to clean them using a commercial rust remover.

Physical damage

The location of the splash shields is not really maintenance-friendly. This is actually the primary reason why they are very much susceptible to acquiring scratches, cracks, and dents. Since your Hyundai Tucson splash shields are meant to protect your vehicle's most essential components, any damage on these protective accessories makes them less capable of performing their task. So if your splash shields already have huge cracks and dents, it is advisable to replace them with new ones as soon as possible.

Simple Care Tips for Your Hyundai Tucson Splash Shield

Your Hyundai Tucson splash shields are working so hard to protect your vehicle's undercarriage from all the possible harm brought by water, mud, and all forms of road dirt and debris. Since your splash guards cannot protect themselves from these harmful elements, it is your responsibility to take care of these protective accessories. Doing so is not really difficult. Here are some easy and effective ways in keeping your splash shields in good shape:


Tighten the splash shields' mounting brackets.

It is important to always secure the bolts and screws that hold your Hyundai Tucson splash shields in place. Making sure that these mounting tools are tight will guarantee your splash shields' stability in all road conditions. Since your Hyundai Tucson is relatively higher than other vehicles, checking the screws of the splash shields will be easier. Apart from checking the tightness of the bolts, you may also want to examine if they are already infested with rust. If the level of rust buildup can no longer be solved by applying commercial rust remover and WD-40, it is recommended to replace the screws immediately before the rust spreads across the surface of the splash shields.


Clean the splash shields regularly.

Keeping the splash shields clean and shiny is really impossible since they are meant to block all the dirt and water from entering the engine block and the brake assembly. However, it would really help if you would clean them as often as possible. Aside from improving the look of your vehicle's lower half, cleaning the splash shields from time to time will help prevent the accumulation of rust. You can use the traditional soap-and-water solution to clean the mud guards, but it is also recommended to use a special cleaner for steel-made car parts. You can also apply a thin layer of polishing agent after washing the splash shields. Doing this will enhance their protection against rust and corrosion.


Repair minor damage as soon as possible.

Steel-made splash shields are a bit difficult to repair, so when these are damaged, their immediate replacement is highly encouraged. As for the splash shields made from ABS plastic, minor cracks and scratches can still be repaired and covered. Just like in repairing cracked bumpers and bumper covers, you can use sturdy sealing agents to cover up the hairline cracks on the surface of your Hyundai Tucson splash shields. This will also prevent the damage from worsening, which is most likely to happen after some time. The process of restoring your splash shields is actually very easy. Plus, it will let you save your hard-earned bucks instead of spending them on replacement splash guards.

Helpful Automotive Resources

Hyundai Reveals All-New Tucson for 2022
September 19, 2020
Hyundai Reveals All-New Tucson for 2022To continue the upward trend of the Tucson’s market performance, Hyundai is giving it a design overhaul complete with the same futuristic styling seen on 2019’s Vision T concept.
Spotted: Hyundai Starex Prototype
September 27, 2020
Spotted: Hyundai Starex PrototypeSounds ripe for an update, right? Hyundai appears to think so.
Hyundai to Say Goodbye to Manual Venue in 2021
September 25, 2020
Hyundai to Say Goodbye to Manual Venue in 2021Hyundai sounded optimistic when it launched an affordable crossover in the US market, equipped with a six-speed manual transmission and a CVT only offered as an option. At the time, there was a significantly lesser number of manual vehicles. Not a single customer purchased a manual Venue in the previous
Hyundai Shares New Engine Details for 2021 Santa Fe
October 18, 2020
Hyundai Shares New Engine Details for 2021 Santa FeFirst on the list of upgrades is the new base engine—a 2.5-liter inline-four that delivers up to 191 horsepower and 181 lb-ft of torque. The engine will be paired with an eight-speed automatic transmission and will be available with a standard front-wheel-drive and optional all-wheel-drive. According to Hyundai, fuel efficiency
Hyundai Kona Electric Recalled Over Fire Risks
October 16, 2020
Hyundai Kona Electric Recalled Over Fire RisksAccording to a report by Reuters, Hyundai and the transport ministry of South Korea have issued a recall order for 25,564 units of the Kona Electric with build dates between September 2017 and March 2020. All the vehicles in question are scheduled to be inspected starting October 16, with the
Semifinalists for 2021 North American Car of the Year Announced
October 08, 2020
Semifinalists for 2021 North American Car of the Year AnnouncedA total of 27 models were included in the list: eight sedans, 15 SUVs, and four trucks, all of which were either renewed or redesigned for the next year. As expected, utility vehicles dominate the lineup, including new generations of some highly anticipated nameplates such as the Ford Bronco Sport,
Copyright ©2020 CarParts.com, Inc. All Rights Reserved.
Terms of Use
Privacy Policy