Common Causes of Toyota Highlander Tail Light Failures
The tail light is one of the most important safety equipment fitted in your car. Despite all the features and benefits it has to offer, unfortunately, it's not given equal treatment. No one wants a broken tail light because it requires much attention. The longer a broken tail light is put off, other's safety and yours will be at risk. In the following paragraphs are the most common problems encountered by tail lights.
Perhaps the most common problem and the easiest to resolve is a burned out bulb. The tail light assembly has many tail lights, each having their own function. Nevertheless, when a single bulb tail light stops working, the first thing to look for is a burned out bulb. Most tail lights can be accessed behind the assembly in the trunk of the vehicle. However, on some vehicles, the whole tail light assembly must be removed first to access the bulb. After removing the bulb, don't automatically consider replacement. It can still be inspected to determine if the filaments are broken, burned out, or the connection is loose. The tail light of one part is the same for everything in the assembly so you can swap some bulbs in the meantime before getting new ones.
The next most possible and sensible cause of tail light failure is when the fuse of the tail lights get fried. This is the case when multiple lights fail all at once. You might be looking at a blown fuse after you diagnosis of the bulbs comes out negative. Locating the right fuse is a real squeeze so always consult the owner's manual. The fuse can be inspected by looking at the thin metal strip inside the fuse. See if it is broken or burnt.
The last thing to go wrong and the least to be expected to fail is the wiring that connects the tail light to the battery terminal. This is the final problem maker if neither the bulb nor fuse is blown. Under the same breath, loose wiring is attributed to a tail light failure most of the time. You can check the wiring and the connections to make sure they are in good shape and the surfaces are not corroded.
Toyota Highlander Tail Light Buyer's Guide
- The Toyota Highlander is a 5-door midsize crossover SUV and is the North American version of the Japanese and Australian-market Kluger.
- If you prolong a dimming tail light bulb, it will reach the end of its service life and may not switch on again the next time you’ll be needing it.
- The tail lights are the primary part that gets affected in rear-end collisions, and impact damage is often the key reason for replacing tail lights.
- If you notice that your tail lights are out despite having your headlights on, chances are the tail light bulbs, its wirings, or the tail light assembly itself is failing.
- Apart from the tail light bulbs, a tail light assembly houses the brake lights, turn indicators, and backup lights.
- A good practice would be to regularly check your headlights, tail lights, and other safety components in your car before leaving the driveway.
- Toyota Highlander tail lights cost around $30 to $400.
The Toyota Highlander is a 5-door midsize crossover SUV and is the North American version of the Japanese and Australian-market Kluger. Built using the very same platform as the Toyota Camry, it is the very first car-based midsize SUV in the market. Many consider it as the counterpart of the truck-base, true midsize SUV 4Runner, which, at the time of the Highlander’s launch, was slightly smaller.
The amount of Toyota Highlanders on the road today backbones the healthy demand for replacement parts. One part that’s commonly sought by Toyota Highlander owners is the tail light. If you’re looking for a 2014 Toyota Highlander tail light replacement in the market, this article will give you more information about Toyota Highlander tail light problems—its symptoms, importance, and cost.
Signs your tail lights need a replacement
When a component in your car turns bad, it usually shows symptoms. Here are a few persuasive reasons for considering getting a tail light replacement for your Toyota Highlander:
A dimming tail light bulb is an early sign of a worn-out bulb. It may become apparent when braking, as the brake lights get affected. If you prolong this, the bulb will reach the end of its service life and may not switch on again the next time you’ll be needing it. The easy solution involves replacing the bulb rather than the whole tail light assembly. However, check and make sure that the problem didn’t originate from a tail light assembly or wiring issue.
No matter how cautiously you drive, accidents happen. Sometimes, they happen because of other drivers. Rear-end collisions share a sizable chunk of accident rates around the world. The tail lights are the primary part that gets affected in this kind of accident, and impact damage is often the key reason for replacing tail lights.
To help you save money, evaluate the damage first before purchasing a replacement part. Sometimes, the beating gets limited to just the lens, so it’s only logical to go for a Toyota Highlander tail light lens replacement.
Tail lights that don’t switch on
All modern vehicle models have tail lights that integrate with the headlight, meaning the tail light will turn on whenever you switch on the headlight. If you notice that your tail lights are out despite having your headlights on, chances are the tail light bulbs, its wirings, or the tail light assembly itself is failing. Contact your mechanic and have it checked right away.
Why is it important to replace a failing tail light?
Your tail lights integrate multiple lights into one unit. Apart from the tail light bulbs, a tail light assembly houses the brake lights, turn indicators, and backup lights. If one of your tail lights turns bad, it may affect two or more of these lights, which are all important for your safety. Keep in mind that the tail lights help other drivers to assume your position by serving as a reference point on low-lit areas, such as remote highways.
A good practice would be to regularly check your headlights, tail lights, and other safety components in your car before leaving the driveway. Aside from being unsafe, state laws also strictly regulate that all vehicles should have a complete set of working tail lights. That means you can face a violation of driving with even just one faulty tail light.
Finding the right fit for your Toyota Highlander
With four generations under its nameplate, searching for the right part can prove challenging if you do it manually. What’s good with purchasing from an online car parts store is you’ll be able to filter the results down to the right parts for your specific vehicle. Just key in the year, make, and model in the filter bar under the search menu.
Toyota Highlander tail lights cost around $30 to $400. They are sold individually, in sets, and as part of a kit that sometimes comes with a rear bumper cover.
How to Keep Your Toyota Highlander Tail Lights in Top Working Condition
The tail lights perform every time even with low maintenance. But this notion overshadows the fact that the tail light needs some attention from time to time. Many car owners and drivers disregard taking good care of their tail lights until it's too late. Therefore, doing some protective measures will guarantee that your tail lights will be in good shape until in the foreseeable future. Furthermore, this will definitely save you from hassle, expenses, and potential life-threatening scenarios. Here are some fast, easy and practical steps you can start incorporating to your maintenance routine starting today.
Change burned-out bulbs as soon as possible.
With proper care and use, bulbs in the tail light could potentially outlast your car. However, given the propensity of the material to burn out because of continuous use, changing the bulbs periodically will make certain that you won't be caught red-handed sporting malfunctioning tail lights by the authorities. Inspect the bulb, especially the filaments, to let you know how far or near are you from changing them.
Check the fuse.
The tail light is powered by electricity and like all things electrically-powered, a fuse is needed to regulate the power in the right doses. Without them, you risk burning the bulb or even worse, heightening the fire hazard of your vehicle. These parts wear out frequently, especially when they get stressed with continuous use. Once in awhile, it's worth checking the fuse intended for the tail light. In addition, you might want to clear out any debris that can get in between the fuse and the contact.
Test the wires.
This can be particularly helpful when you see the turn indicator light flash too fast, too slow, or even not at all, because they are all caused by a wiring problem. You've got a grounded wire to be exact. Test the wires directly by connecting a test light to the wire harnesses then check both the positive and negative terminals of the wire to identify wire is grounded.
Clear the contacts.
If the seal of the tail light assembly gets loose, the sockets will experience corrosion after prolonged exposure to moisture. You can clean them with an electric contact cleaner then reseal the assembly to keep moisture away.