Reasons for a Busted Chevrolet Silverado 1500 Tailgate Handle
It's pretty common for the tailgate handle of a Chevrolet Silverado 1500 to be the source of many problems. There have been countless reports of this exterior accessory breaking or failing to work. As a result, people tend to give up on it and usually drive their trucks without a handle to properly open and close the tailgate. As an owner of a Silverado, it's important to know why these fail in the first place. Having this kind of information helps you avoid this type of problem in the future. The following are some of the reasons for having a busted tailgate handle:
A common problem among truck owners is having a tailgate that won't open no matter how much effort is used to pull on the handle. People usually diagnose this to be a bad handle. While this is true in most instances, sometimes, it may actually be fine. It's possible that the problem really lies on the broken plastic clips at the end of the two door-latch rods. These are supposed to be connected to the handle. No amount of handle replacement will open your tailgate if you fail to spot these cracked clips.
A dislodged tailgate handle is another common problem for the Silverado. When this part of the assembly is loosely installed on the door, it's because one or both plastic tabs connecting the inner face of the bezel to the door-latch rods are broken. This normally happens after a couple of years of use. However, this can occur prematurely if it's constantly exposed to heat and hot weather long enough to loosen the plastic tabs.
If you've already replaced the tailgate handle and the plastic clips but you still can't get the assembly to work, it's time to look directly at the door-latch rods. The rods should equally extend from both sides to function properly with the handle. An uneven one can be returned to its place by pushing it inwards. If this doesn't solve the problem, it might be permanently stuck that way. This usually happens if something hits the tailgate-like a solid surface when you're going in reverse, or an unsecured load.
Chevrolet Silverado 1500 Tailgate Handle Buyer’s Guide
- Chevrolet Silverado owners often access the truck bed, so it’s not uncommon to hear of tailgate parts such as the tailgate handle becoming worn out.
- Reasons to replace your Chevy Silverado 1500’s tailgate handle include: physical damage to the handle, difficulty in opening the tailgate, customizing the look of the tailgate, and upgrading to a better tailgate handle.
- If you’re planning to replace or upgrade your Chevy Silverado 1500 tailgate handle, expect to spend around $5 to $30 for a direct fit replacement. The price is affected by the model of your Chevy Silverado and the material for the handle.
The Chevrolet Silverado 1500 is a light-duty pickup truck that’s perfect for anyone looking for heavy-duty performance in a lighter, more compact body. The Chevrolet Silverado line, which includes the 2500 and 1500 models, is among the top-selling vehicles in the United States.
Chevy pickup trucks, the Silverado 1500 included, are known for having a strong and reliable build quality. However, you might still want to replace or upgrade certain parts of your truck after some time. One the common parts to replace is the Chevy Silverado tailgate handle.
Reasons to Buy a New Tailgate Handle for a Chevrolet Silverado 1500
The truck bed is one of the major selling points of any pickup truck. Chevrolet Silverado owners often access the truck bed for a variety of reasons. Because of this, it’s not uncommon to hear of Chevrolet Silverado tailgate parts, such as the tailgate handle, becoming worn out and needing replacement.
Here are some reasons why you might want to buy a new tailgate handle for your Chevy Silverado:
Physical Damage to the Tailgate Handle
A cracked, warped, or distorted tailgate handle isn’t just unsightly, it could prevent you from opening your tailgate and gaining access to your Chevy Silverado’s cargo bed. If you see any visible damage to your tailgate handle, it’s time to buy a replacement.
Difficulty in Opening the Tailgate
Sometimes, the handle doesn’t have any visible signs of damage but it still needs to be replaced. Another common reason to replace your tailgate handle is if you’re having difficulty opening the tailgate. This is a common sign of a faulty handle or of worn out latches.
Customizing the Look of the Tailgate
OE replacement or aftermarket tailgate handles come in a wide range of finishes. If you’re looking to customize your pickup truck’s tailgate, you can get a tailgate handle in a chrome finish or one that matches the color of your truck for a unibody look.
Upgrading to a Better Quality Tailgate Handle
The plastic tailgate handle that comes with your Chevrolet Silverado is a hardy component, but exposure to extreme weather conditions can cause it to crack or fail faster than usual. If you find yourself constantly replacing a damaged tailgate handle, you might want to replace it with a stainless steel tailgate handle.
Choosing Your Chevy Silverado Tailgate Handle
When choosing a replacement tailgate handle, you need to find one that exactly matches your Chevrolet Silverado. To make sure that you’re getting the perfect fit, don’t forget to input your truck’s make, model, and year when you’re searching for a new tailgate handle.
When replacing your tailgate handle, make sure to check if you need to replace any other Chevrolet Silverado tailgate parts as well. Sometimes, issues with the tailgate handle might actually be caused by other faulty tailgate parts.
How Much Does a Chevrolet Silverado 1500 Tailgate Handle Cost?
If you’re planning to replace or upgrade your Chevy Silverado 1500 tailgate handle, expect to spend around $5 to $30 for a direct fit replacement. The price is affected by the model of your Chevy Silverado and the material for the handle. A 2001 Chevy Silverado 1500 tailgate handle replacement made of rust-resistant metal, for instance, would cost more than a plastic replacement part.
Four Don'ts to Make a Chevrolet Silverado 1500 Tailgate Handle Last a Long Time
A broken tailgate handle is a frequent problem among owners of a Chevrolet Silverado 1500. This is very common that lots of Chevys on the road don't have the bezel or the whole assembly installed. If you still have the one on your truck intact, you better do everything you can to make your ride stands out from the rest and ensure the handle stays there for a very long time. The following are four don'ts to remember so that you always have a working tailgate handle on your truck.
Don't slam the tailgate hard.
It's vital that you are gentle and careful whenever you handle the tailgate. Using too much strength to open or close the door rattles its internal mechanisms that hold it in place. Being too strong on the tailgate can even damage its handle. Just be considerate of the whole assembly's condition and everything should on it should last for a very long time on your truck.
Don't force the handle to open.
Don't use too much force when pulling the handle. It's very possible that a stuck tailgate can be caused by either a door that's still locked or some problems with its insides. Letting your frustration get the better of you isn't a good idea, and is dangerous for the tailgate assembly. If you insist on working the handle, you might end up with snapped and broken plastic pieces and a busted door.
Don't open the tailgate with long fingernails.
Scratches and scars are pretty common. These are usually caused by anybody pulling on a tailgate handle with long fingernails. Holding hard items like keys, rings, and other accessories also do the same damage. Some scratching is negligible. However, frequently grip the handle with long nails or while holding items has the potential to completely ruin its clean look and finish.
Don't forget to clean the handle.
These plastic tailgate handles can also look bad if you don't take the time to directly maintain it. Ones that are overexposed to sunlight fade. As an exterior piece, it also gets hit with its share of dust and dirt. A good clean followed by some polishing goes a long way to keeping the good looks of your truck's tailgate handle.
Frequently Asked Questions
The Chevrolet Silverado 1500 tailgate handle is stuck. It makes closing the tailgate difficult because it won't latch easily. Does it need to be replaced with a new handle or can the old one still be fixed?
Before deciding to spend on a replacement, first, try spraying the handle assembly with WD40. Stuck tailgate handles are usually caused by rust; using this lubricant can decrease friction and restore the handle's functionality.
The Chevrolet Silverado 1500 tailgate handle still works fine but it doesn't look new, so it ruins the style of the truck. What options are available to improve its look without installing a replacement?
Some of the options DIYers and enthusiasts can look at are installing tailgate handle bezels, covers, housings, and relocators. These can improve the appearance of the truck's rear and extend the service life of the tailgate handle. Bezels, covers, and housings pretty much work the same way--these usually come in one-color or printed finish that cover the handle's worn-out look or customize it. Relocators are a completely different thing; they cover the hole where the handle is installed to give the truck bed a seamless look without removing its accessibility.
What are the advantages of using aluminum Chevrolet Silverado 1500 tailgate handles over plastic ones?
Though plastic tailgate handles are a lot cheaper than those made of aluminum, they do not provide the custom look and the eye-dazzling shine that aluminum handles possess. Aluminum handles are also machined from solid aircraft-grade material, making them a lot more resistant to temperature shifts and extreme weather conditions. Even if they are pulled and pushed frequently, aluminum tailgate handles do not easily loosen or break. If locked, these handles are also more difficult to open than plastic ones; that is why they provide better cargo protection against thieves.