Select your vehicle
We do not have any compatible Tie Down .

Tie Down Guides

How to Find the Right Tie Down for your Vehicle

Cheap and easy to install-these are the two reasons why tie downs are the preferred choice when securing cargo. Tie downs have different load ratings, and that's something you have to consider before you make a purchase. If you're not sure in the kind of tie down that you want to install in your vehicle, you better read this guide so you can make an informed decision.

Types of tie downs available on the market

  1. Bungee cords- For lightweight applications such as holding down tarps, trimmers, and rakes, bungee cords are the perfect tie downs that you can use. Bungee cords have a hook on each end, allowing them to safely secure cargo. To make sure that a bungee cord is in good condition, always check for frays and wear.
  2. Cam straps- These tie downs come with a cam device that keeps the strap tight and secure. The straps used are usually made of nylon, making them perfect for hauling lightweight cargo such as lumber, ladders, lawn mowers, grills, and even furniture.
  3. Ratchet straps- These tie downs are quite popular because they're available in different sizes, lengths, and load ratings. Since the straps are equipped with hooks, there's no need to tie them anymore. Because of the ratcheting mechanism of ratchet straps, they exert more down force compared to cam straps. The problem with ratchet straps is that they're prone to jamming, especially when the strap ends up being caught in the ratchet.
  4. Elastic cargo netting- This tie down is a good option if you're looking for a way to secure cargo of different shapes and sizes. Elastic cargo netting is affordable, and it can last for a long time if stored properly. Unlike other tie downs, the elastic cargo netting isn't capable of carrying heavy loads.
  5. Web netting- Unlike the elastic cargo netting, the web netting is able to keep heavy loads inside a truck bed. Aside from that, it's available in different shapes, sizes, and load ratings. Before buying a web netting, you have to consider that it's more expensive compared to other tie down products.

Understanding rated capacity and working load limit

Every tie down is rated based on its rated capacity and working load limit. For example, if a tie down has a rated capacity of 12,000 lbs., it doesn't mean that it can actually handle that much weight. If you want to know how much weight a tie down can actually hold, you have to derive the working load limit. To do that, multiply the rated capacity by 1/3 (in this case 12,000 lbs.) and you'll get a working load limit of 4,000 lbs. This only means that you shouldn't try to load a cargo to a tie down, if it would exceed its working load limit.

D-Ring Style Tie Down: Step-by-Step Installation Instructions

Securing your cargo is a must if you have a pickup truck or a trailer. Fortunately, doing it requires a relatively affordable and easy-to-install component called a tie down. Though there are many tie downs available, the d-ring tie down is a good option if you want a simple and straightforward installation. If you already bought a d-ring style tie down, you can easily install it by following the instructions below.

Difficulty level: Easy

Tools needed:

  • D-ring tie downs
  • Metal screws
  • Power drill
  • Oil Lubricant
  • permanent marker
  • Screwdriver

Step 1: Pick the locations on the trailer floor or truck bed where the d-ring style tie downs will be installed. The locations that you're going to choose will depend on how heavy your load is. Note: Be sure to check the workload capacity and working load limit of the tie downs before using them.

Step 2: Once you've determined the spots where the d-ring style tie downs will be placed, mark the spots using a permanent marker.

Step 3: Put lubricant on the specific spots where the tie downs will be installed.

Step 4: Using a power drill, secure the tie down in place by screwing its metal screws into the floor of the trailer or bed truck. Remember to press hard on the power drill so that the screw can go through the metal surface. Repeat the same step for every tie down that you will use.

Step 5: Make sure that each tie down is secured in place.

Step 6: Using the right straps, test the tie downs by loading your cargo into the trailer floor or truck bed.

Step 7: In case some of the tie downs aren't properly secured, be sure to re-tighten the screws using a power drill or screwdriver.

Copyright ©2020, Inc. All Rights Reserved.
Terms of Use
Privacy Policy