A Few Helpful Tips to Guide You When Replacing a Turbo Oil Supply Pipe
You probably already know how important oil is to the mechanical bits of your car. More than just ensuring that various components are moving as smoothly as they can, your car's oil also keeps these components from deteriorating prematurely. This is why you need to ensure that every automotive part responsible for circulating this fluid throughout the entire vehicle is kept in tiptop shape, and that includes the turbo oil supply pipe. A damaged supply pipe may jeopardize the performance and safety of your car. So, make sure you replace it as soon as you can by conducting these steps:
Difficulty level: Difficult
What you'll need:
- Floor jack
- Jack stands
- Socket and ratchet set
- Rubber mallet
- Replacement turbo oil supply pipe
- Penetrating oil
Step 1: Using the floor jack, carefully lift up your car until you've made enough space under it for you to comfortably crawl into. Make sure that it's safely propped up on the jack stands before you crawl under it to avoid any accidents. It would also be better if you're working in a place with a nice and even flooring to ensure your safety.
Step 2: Before you start the procedure, it's recommended that you inspect the components that are hindering your access to the turbo oil supply pipe.
Step 3: Spray penetrating oil on the bolts of the components that you need to get out of the way. This should save you from the frustrations of prying a stuck bolt off its place.
Step 4: Using your socket set and wrench, remove the obstructing components one by one. The parts that you need to take off may vary for every vehicle, so make sure you check your owner's manual to see if there are any further instructions that may help you with this step. In most cases, you may need to remove the vacuum lines, turbo heat shield, and downpipe.
Step 5: After you've removed all the other parts out of the way, you should now be able to access the turbo oil supply pipe without any problems. Use a wrench to free it from where it's mounted. Detaching it may be a little tricky, so make sure you have an ounce of patience with you.
Step 6: Once you've successfully removed the damaged turbo oil supply pipe, you should install its replacement in place.
Step 7: Reattach all the parts that you removed from your car. Don't forget to double-check if you've fastened them up properly. The last thing you want is for one of these components to come loose while you're driving.
Step 8: Finish up the task by conducting a final visual inspection. Lower your car and take it out on a test drive to see if it's performing properly.
Replacing a damaged turbo oil supply pipe is complex task that requires an understanding of various automotive components. This entire procedure may take approximately three hours to finish. Remember to practice proper safety precautions and wear the necessary protective gears.