Windshield Hardware: Getting What Your Vehicle Needs
Damage and every day wear are inevitable with your automotive parts, especially those that are exposed to the weather and flinging road debris. Your windshield is one of the best examples, which is why it is equipped with heavy-duty hardware that will keep it firmly in its place under severe conditions. But these securing parts can only take so much and may even become worn faster than your main part. If this is the case for your own windshield hardware, replacement is necessary. Here are some reminders that can help you get new and better hardware for your windshield:
- Tie down. Characterized by heavy-duty stainless steel materials, tie down hardware works to secure your windshield to the molding and to the frame of your vehicle. Tie downs come in footman loops and hoops and may be available in individual packs or kits of four. If you're looking for heavy-duty replacement hardware for your windshield, the tie down type is a good choice.
- Molding clip. Molding clips may be made of synthetic rubber or plastic materials. They keep the windshield intact with the molding. They usually come in different designs and styles, making them look like aesthetic additions. Molding clips are what you need if you want lightweight and good-looking windshield hardware for your vehicle.
- Fastener. Another type of windshield hardware is the fastener. These are heavy-duty bolt-like parts that secure your windshield to the cowl. This type is typically in kits of four or more. Given the construction and design of this type of windshield hardware, you can rest assured that a set of windshield fasteners will restore the reliability of your vehicle glass.
- Stainless steel. Windshield hardware made from stainless steel is the most durable choice you can find in the aftermarket industry, and it is the most used to these days. If you want long-lasting hardware for your windshield, trusted brands of windshield tie downs like Rugged Ridge have lifetime and limited warranties.
- Polyvinyl Chloride. Also known as PVC, the Polyvinyl Chloride is the third-most used plastic material when making mounting hardware because it can resist both fire and water. It also offers the strength of other known alternatives like iron or copper, but it is less expensive than these two. If stainless steel is a bit pricey for you, PVC windshield hardware is your best choice when looking for reliable but cheap windshield hardware replacement for your ride.
Step-by-Step Installation of Windshield Hardware
Replacing your windshield or its molding requires replacement of its hardware, too. You need to do this to ensure better service life and functionality from these parts. Installation of the clips, fasteners, and tie downs are also very easy. In fact, we can help you install it right with these instructions:
Difficulty level: Moderate
Things you'll need:
- Screw drivers (flat and/or Philips, depend on the hardware type)
- Razor blade
IMPORTANT: Free your windshield from unwanted marks when removing and installing new hardware and/or molding by covering it with a cloth or newspaper.
Step 1: For fastener and molding clip types of windshield hardware: Pry the clips or fasteners off the molding of the windshield carefully to prevent damaging the molding. If you are replacing the molding too, just cut it from the outside, between the pinchweld and glass. NOTE: The molding of your windshield may be flexible, but it is also a strong material. Use very sharp and industrial-type cutter in cutting it. For clamp or tie downs: Remove the securing bolts of the footman loops and hoops to loosen their clamping force from the molding.
Step 2: Remove any adhesive and/or molding remnant from your pinchweld, but be careful not to damage the urethane that actually holds your windshield firmly in place. Use razor blade to make the task a bit easier. If this will expose rusted or corroded areas, fix them and apply some primer to cover them.
Step 3: Install the new clamps, fasteners, or molding clips. If the molding was taken out, install the molding first and secure it with any of these hardware choices.
Step 4: Clean the areas where you installed your new parts, and remove the cover you placed on the windshield.
Step 5: Go for a ride to test your new hardware and/or molding from vibrations and gush of wind.