Five Tips to Keep Your BMW 323is Intact
Your BMW 323is is a good old car that is very fun and reliable. In the long run, it is inevitable that you will experience problems with it. You would also need to replace the old parts that have been damaged overtime. Unfortunately, as a luxury car, BMW parts and service are a tad higher than other vehicles. That is why it is important to keep your vehicle always in perfect shape. You may find maintenance tips on your owner's manual, and here are some more that you might find there, but find useful when taking care of your BMW 323is.
- Inspect your cooling system.
Having a bad cooling system is such a hassle especially if your vehicle is luxurious as the 323is. Sadly, this is one of the most common problems of this vehicle. You may start by checking your radiator for any leaks. If you found it to be positive of leaking, then you should replace it immediately. When ignored, a leaking radiator may cause overheating, which may lead to engine failure.
- Check your bushings for signs of wear and tear.
If you happen to experience a sudden clunk or jolt in the steering whenever you brake, then you might want to check your front control arm bracket bushings for signs of damage. This is also a common problem for this particular BMW. When this happens, there is an urgent need to replace it with a new part. This is to ensure that you will not encounter any suspension problems. These bushings tend to fail over time. Replacing it is easier and cheaper than compromising your drive.
- Replace leaking power steering hoses.
When your power steering hose leaks, it is important to have it replace immediately. There are instances where multiple power steering hoses may simultaneously fail, which may cause an increase of temperature under the hood, leading to a disastrous accident. Even a tiny hole in one of the hoses should alarm you, as it would leak the power steering fluid. As soon as the hose deteriorates, you should not keep it as it might harm the other parts of your vehicle due to the leaks.
- Change your failed blower final stage fan resistor.
If you are having a problem with your fan motor - may it be surging or not working at all - then you should replace it as soon as you can. When your fan won't turn off when your car is switched off, then it is a sign that your resistor needs to be changed immediately. Having a failed resistor may cause various problems, which could lead to damaging other components of your vehicle.
- Check your pedal bushes regularly.
Have you experienced a squeaking clutch pedal or movement in the pedal from side to side? If yes, then you should inspect your pedal bushes. You do not have to bear with this problem any longer, as there are lots of replacement parts that you can find online. Make it a point to keep track of all the inspections that you'll perform in your vehicle.