Four Ways to Effectively Maintain Your Acura TL Brake Disc in Optimum Working Condition
Your Acura TL brake disc is another part of your brake system, which ensures that your car stops or slows down whenever you want it to. Keeping it in top shape is essential not just for your sake, but also for the safety of the other people around you. Check out some of the following tips to get continuous superb performance from your brake disc:
- Routinely inspect the condition of your brake disc.
Inspecting the condition of your brake disc at least once a year or every time you have your brake pads replaced is a good maintenance practice you should observe. This will keep you in the know of any potential problems you need to pay attention to. It's a good thing that you don't have to dissemble any part of your brake system to inspect your brake disc. It's a good rule of thumb to measure its thickness to ensure that it's still enough for safely stopping or slowing your vehicle down. You should also look for signs of rust and uneven wear.
- Free it from dust and debris.
When filth gets in between the disc and pad, it causes uneven grooves over the brake disc's metal surface. Ridding your brake disc of dirt and debris can undoubtedly lengthen its life. This is an incredibly easy and affordable task; all you need is a high quality spray-on brake cleaner to effectively remove accumulated contaminants.
- Take good care of the other braking components as well.
No matter how many hours and effort you spend keeping your brake disc well-maintained, it will all be for nothing if the other parts of your braking system are not in their best possible condition. One damaged brake component is likely to destroy your brake disc as well. Take a look at the brake pads, slide pins, and caliper every once in a while. Replace or repair failing brake components if you see any.
- Avoid straining it as much as possible.
You may be surprised by how much strain your brake disc suffers every time you haul a heavy load with your car. But aside from overloading your vehicle, your brake disc also gets stressed whenever you drive in a stop-and-go manner. As much as possible, avoid subjecting your Acura brake disc to stressful driving situations in order to keep it from deteriorating prematurely.
Three Signs of a Damaged Acura TL Brake Disc and the Culprits Behind Them
It's not really surprising for your Acura TL brake disc to get damaged, especially with the harsh working conditions that it's constantly exposed to. Identifying and fixing problems the moment they occur is important to ensure that it's doing its job of decelerating or stopping your car as needed. To help you out, watch out for the following symptoms of a failing brake disc:
Vibrating or pulsating
Have you been feeling vibrations or pulsations coming from the pedal or steering wheel every time you step on your brakes? This is a very common indication of a brake disc that has worn-out unevenly because of dirt, rust, hard spots, and incorrectly tightened lug nuts. Diagnosing this problem can be done in two ways: by conducting thorough visual inspection or by measuring its thickness variation using a dial indicator. If you confirmed that your brake disc is indeed worn-out unevenly, you can either have it resurfaced or replaced. Replacement is recommended if your brake disc has thinned down to a dangerous level.
Keep an ear out for any squealing or grinding noises that may be coming from your brakes. Warps and grooves are the most common causes behind these caterwauling sounds. Inspect your brakes disc as soon as you hear any noise coming from it. Keep in mind that time is of the essence when it comes to brake-related issues, you never know when your entire braking system may fail. First thing you should do is to check if the surface of the brake disc is smooth and even. Look for grooves, scores, and warped areas. Measuring its thickness is also a good idea if you're looking for a more definite diagnosis. Again, resurfacing is the quickest fix for this dilemma, provided that the brake disc's thickness doesn't go below the minimum recommend measurement.
Discoloration is another indication of serious problem with your braking system. If you see your brake disc turning bluish in color, tend to it as soon as possible before it causes other components of the brake system to get damaged as well. Extreme heat due to excessive and unnecessary braking is the usual cause behind this warning sign. Take your car to a mechanic to find out the best way to deal with this problem. You may be required to replace your brake disc with a drilled or slotted new one.