Some of the Things You Can Do to Keep Your Audi A4 Quattro Brake Disc Working Properl
Decelerating your car won't be possible if your Audi A4 Quattro brake disc is in bad condition. The entire system basically won't be effective if you neglect this vital component. Not only will this set you back by a sizeable sum, but it also puts you at risk of encountering fatal accidents. This is why it's imperative that you always keep it well-maintained. Here are some of the things you should do to keep it working the way it should be:
- Examine the brake disc every once in a while.
Doing a quick scan of the brake disc only takes a small amount of your time to accomplish, but dedicating a few minutes to this simple maintenance procedure will surely pay off in the long run. Conducting this routinely keeps you alert of impending problems that may affect the reliability and efficiency of the brake disc. It's important that you measure the thickness of the disc to find out if it can still safely perform its role in your car's braking system. Rust, grooves, and hard spots are also some of the things you should be watchful of.
- Avoid putting too much strain on it.
You've probably applied your brakes thousands of times throughout the entire lifetime of your car, consequently subjecting the brake disc to continuous harsh working conditions. One of the best things you can do to keep premature damage from occurring is by lessening the strain that your brake disc has to endure. You can do this by simply practicing precautious driving habits and avoiding too much heavy cargo.
- Know the best time to replace and resurface.
After a few years of use, you can expect irregular grooves to form on the surface of your Audi A4 Quattro brake disc. Once you find it suffering from this type of damage, the first thing you should do is to figure out if it still can be put back to use through resurfacing or turning. One of the factors that you should take into account is its thickness. You should be aware of the minimum thickness that its manufacturer recommends; you may find this spec engraved on the surface of the disc. If the brake disc is too thin to be resurfaced, replacing it is the best way to go.
Spotting the Most Common Indications of a Failing Audi A4 Quattro Brake Dis
Brake disc problems make your entire brake system inefficient. This is why it's important that you learn how to diagnose the most common problems that are associated with your Audi A4 Quattro brake disc. Check out some of the following symptoms you should watch out for:
Pulsating brake pedal and steering wheel
Have you ever felt vibrations coming from the brake pedal or steering wheel every time you try to stop or decelerate your vehicle? One of the possible causes behind this is a damaged brake disc. Jack up your car and check if the disc is unevenly scored or warped. Brake discs usually get warped or irregularly grooved because of too much heat, worn-out brake pads, or unsecured attachments. It's a good thing that small damage may be fixed by getting it resurfaced or turned by a professional. However, if the damage is too severe, you may need to replace it instead to ensure your safety.
Incessant screeching noises
Squealing metallic noises are actually common when it comes to brakes, especially if your car has been sitting idly on your garage for quite a long time now. However, if you're hearing this disturbing sound every single time that you step on the brake pedal, then this may be your brake disc trying to warn you of impending irreparable problems. The most common cause of this noisy issue is a worn-out brake pad. As you know, the pads are the part of your brake system that clamps down on the disc. Once their linings go below the minimum allowable thickness, their metal backing plates will touch the disc, therefore creating the metallic noise that you're hearing. If you don't tend to this issue right away, your Audi A4 Quattro brake disc will either get warped or form uneven wear marks. So, inspect the disc immediately to see if it needs to be repaired or if brake pad replacement is enough to get the job done.
Unusual change in color
If you notice any variation in the color of your brake disc, you better pay close attention to it especially while you're out on the road. Your driving habits contribute a lot to this problem. You may be straining your brake disc too much, causing excessive heat to damage its material. Take your car to a mechanic to fund out the type of brake disc that's best for you.