Save Your Ford Explorer Brake Disc with These Maintenance Tips
For a seamless stopping performance, you need to keep your Ford Explorer brake disc in optimum condition. It doesn't require a professional to tell you how important the brake disc's role is especially if you've encountered brake-related problems before. Take note that it's almost impossible to stop your car without properly working brakes. So to ensure that you get full control of your vehicle, here are some ways to maintain your car's brake disc:
- Clear off dirt and debris with a spray-on cleaning solution.
It takes regular maintenance for the brake disc to retain its good shape, since it's constantly exposed to brake dust and other contaminants. These unwanted dirt and debris can lead to brake disc damage and reduce your car's braking power.
To prevent this problem, all you have to do is to purchase an aftermarket brake cleaner that works well in eliminating dirt and grime. On top of restoring your vehicle's braking performance, it also fights off dirt thanks to its strong cleaning ingredients. Get a spray-on cleaner that not only gets rid of the contaminants, but also offers rust protection for a certain period of time.
- Sand off light rust from the disc's surface.
Though metallic components get corroded over time, it's still a must that you keep corrosion away as long as you can. In case of brake disc surface rust, you shouldn't worry much because it can be eliminated through regular braking. But if after driving for several times, you're still bothered by the rust on the disc, you can get a fine-grit sand paper, raise your ride and take off the wheel, and lightly sand the rust off the disc.
- Make it a habit to inspect the disc regularly.
You wouldn't want to discover a heavily damaged Ford Explorer brake disc, would you? If you already have a regular car cleaning schedule, make sure that you include the brake disc in the list of components that need to get checked. You can either assess the disc's condition on your own, or bring it to a mechanic for a professional checkup.
Three Common Indicators of a Shabby Ford Explorer Brake Disc
Detecting a faulty brake disc can be quite tricky and confusing, especially for those who are not that familiar with the vehicle's braking system. If you're an experienced driver, then you would most likely have no telling if your brake disc has gone bad. But to make it relatively simple for beginners, we have provided below some obvious signs that give away a damaged Ford Explorer brake disc:
Poor braking performance
One surefire indication of faulty brakes is when you notice that the efficiency of your brakes has significantly dropped. When this happens, you need to get under your car and check on the brake disc to assess its condition.
You need to know that the brake disc is vulnerable to getting cracked due to thermal shock loads exerted on its surface. Never leave a cracked brake disc unattended, as this can lead to a reduced braking performance, and worse, end up with material fracture. In fact, there's no exact crack size that determines when your brake disc starts to disorient your vehicle's brakes.
Steering wheel vibration when braking
Ideally, there shouldn't be any problem or unusual vibrations when you apply the brakes. But when your Ford Explorer brake disc goes bad, things start acting up. This includes the vibration produced in the steering wheel as you step on the brake pedal.
You need to take this symptom seriously, as it can mean that the brake disc has become worn that it needs to get professionally machined or better yet replaced. Driving with a busted brake disc poses hazard not just for you, but also to other drivers on the road. So to have a safe trip, make sure that you bring your car to the nearest repair shop to have the brake disc fixed or replaced.
Brake squeal when brakes are applied
It's almost impossible to miss brake squeals when you drive with a busted brake disc. This usually becomes evident when the distance between the brake disc and the brake pads become too narrow, causing direct metal-to-metal contact.
Brake squeal can also indicate that the disc has been damaged or corroded. To verify if it's the brake disc that causes the noise, check the brake disc and brake pads installed on your car.