There's no way to predict where you're going to get hit during a collision. So to give you total protection, not only should you beef up your front and rear area, you should look into its corners as well. And one way you can increase your safety on the road is by installing a bumper end. The bumper end is a component made from heavy-duty materials like ABS plastic which can be placed at each corner of your vehicle. Once installed, it's able to provide additional protection in case a collision occurs. Not only does this help keep you safe, it also keeps the parts near it safe as well. Aside from being constructed using premium materials, this device is designed to meet and even exceed OE specifications. This ensures that it's able to dish out quality performance and withstand the rigors of the road. Lastly, this device is given a direct-fit design to make it easy to install. This keeps you from wasting time in making unnecessary changes to it or to your vehicle's structure. So instead of risking your well-being as well as your passengers, consider installing a bumper end to your vehicle. By having this component in place, you'll get additional protection that can help keep you and your occupants safe in case a collision occurs.
Bumper End Buyer’s Guide
- A bumper end refers to the corner pieces of a three-piece bumper. It is commonly seen on trucks and SUV. Typically, it is made of steel, aluminum, or plastic.
- There are four different locations: front driver, front passenger, rear driver, and rear passenger sides.
- Determine what color finish suits your vehicle best.
- Bumper ends can be sold individually, in kits or in sets of 4. Prices for individual parts usually cost around $27 - $455.
- Damaged bumper ends spoil the beauty of your vehicle. They drop your truck's/SUV's resale value and might cause an inconvenience on the road.
If there’s a part in your car that is most prone to collision damage, it has got to be the front and rear bumpers. In fact, they are the first panel of your car to receive the impact of an accident, making them one of the most sought-after replacement parts. Usually, bumpers come in one piece. Some designs, however, feature a three-part bumper that consists of a center piece and two corner covers. These corner pieces are called bumper ends.
Don’t mistake a bumper end from a bumper end cap. Bumper end caps are aftermarket products used to reinforce bumper ends and are usually used in off road bumpers. But since bumper caps serve the same purposes as bumper ends, people tend to interchange the terms.
What is a bumper end?
Bumper ends are commonly seen on trucks and SUVs, usually depending on their exterior designs. They are the corner pieces of the bumper which extends up to the wheel well to cover the most impact-prone sites of your car. Some trucks and SUVs have one-piece bumper set, and if that’s the case, you don’t need to look for a bumper end in the market. OE replacement bumper ends come either in metal or plastic form.
One advantage of having a three-piece bumper is that you can replace the side that’s only affected by the damage. A whole bumper replacement usually costs more than a single-piece bumper end. However, the tables could turn when you find yourself in a full frontal collision because you’ll need to replace or fix three separate parts, which could cost you more money.
The deal with bumper end
Bumper ends are built using high-strength materials like stamped steel, aluminum, and impact-resistant plastic. These materials are designed to hold out against minor, low-speed crashes. Since they are mounted on the corners of your vehicle, they get damaged pretty easily, especially due to parking miscalculations in parking lots. Even if it’s made of high-strength metal or plastic, the intensity of the impact could dent or cause your bumper ends to crack. Good thing, bumper ends are sold individually and are relatively inexpensive than a whole single-piece bumper. If you damage one side, you can just buy a replacement and have it installed right away.
What are bumper ends made of?
There are two main materials used in making bumper ends, which are metal and plastic. Metal bumper end materials include stamped steel and aluminum, while plastic bumper ends could come in the form of thermoplastic, such as Acrylonitrile Butadiene Styrene (ABS) plastic.
Stamped steel bumper ends
The strongest option that’s perfect if you are into off-roading. It can withstand slightly heavier impacts compared to the other metal type, aluminum. However, the drawbacks of steel bumper ends are rust and weight, which may be a concern for people who want to maintain their vehicle’s weight-to-power ratio.
This material is lighter than stamped steel. Despite its inferiority to steel when it comes to impact resistance, it is undoubtedly a lot sturdier than plastics. Unlike having bumper ends, Aluminum is also known as a non-ferrous metal, which means you won’t need to worry about rust.
Like ABS plastic, thermoplastics are made of plastic polymers that are heated at specific temperatures and molded to form a product. The manufacturing process is so easy that production lines can make tons of it, which explains why it is relatively inexpensive compared to metals like steel and aluminum. However, its strength and durability are nowhere near any metal.
Buying an OE replacement bumper end
There are four bumper end locations on your vehicle; the front driver, front passenger, rear driver, and rear passenger sides. Knowing what side you need a replacement for would save you time, money, and effort by selecting the right filters on an online marketplace. The front driver side is considered the left-hand side, while the rear passenger is right.
You may also choose from the different color finishes available to find a perfect match with your car’s paint job. You can choose whether you like primed, textured, chrome, powder-coated, or even pearlstone finished.
How much is an OE replacement bumper end?
If you’re out in the market for an individually-sold bumper end, be it front or rear driver and passenger side, prices are around $27 to $455. But if you like maximizing your expense, there are bumper end available with inclusions of complementing items like a valance and bumper filler. OE replacement bumper end kits retail at around $140 to $2,200. Bumper ends are also available in sets of two and four; sets of two come roughly around $40 to $760, while sets of four are available around $230 to $1,400.
What’s the importance of replacing a damaged bumper end?
Treat the bumper end as the typical one-piece bumper; driving with a damaged bumper would spoil your vehicle’s exterior quality. Aside from that, it drops you vehicle’s resale value. You are also putting various components on the front- and rear-end portion of your vehicle at risk when you drive with worn-out bumper ends. That’s aside from the fact that it may come off on the road without you noticing.
Important Facts You Need to Know About Bumper End
You definitely want the best for your vehicle, especially when it comes to its performance and safety features! And wouldn't you want to make your vehicle more attractive? This is why it's wise to equip your vehicle's stock bumper with a bumper end. (Or, replace the bumper's stock ends with new OE-fit units.)The bumper end is a structural addition to the bumper, making the bumper more durable and stronger in absorbing collision impact. Bumper ends also complete the bumper's appearance, giving your vehicle's front end a sleeker, cleaner look. Imagine how your vehicle's bumper would look if it didn't have any ends. Not pretty, right? Better order bumper ends today from CarParts.com! We guarantee fast and efficient service in just a few clicks of your mouse!
• Completes your vehicle's first line of protection
• Adds strength to the bumper
• Provides good looks to the front end of your ride
How to Choose the Right Bumper End for Your Vehicle
A bumper end may be nothing but a simple bumper addition. At first glance, you may think of it as a small panel that completes the look of your car front or rear. In many cases, it is like that, but it actually does more. Other than giving your vehicle a finished and sleek look, this component also offers your vehicle a certain degree of protection against small amounts of impact. When looking for the right bumper ends for your vehicle, you may have to consider these factors. So, how do you find the right bumper end? You have different choices.
Material: Plastic or Steel?
This has always been an ongoing debate among those who want to upgrade the looks of their vehicle using a bumper end. Both can actually give you similar effects appearance-wise, but the difference lies in the durability and weight.
Stainless bumper ends are more durable. They can withstand impacts better than plastic ends can, but they are also heavier and will definitely add a certain amount of weight to your vehicle. That said, they also require a more stable mounting compared to plastic ends.
Our suggestion would be that you base your choice on your daily activities. If you see a lot of off-road drives in your car, you may want to get the steel bumper ends to prevent premature wear. But, if you see mostly city streets in your daily driving activities, then the plastic ones will suffice.
Looks: Painted or Raw?
Different bumper ends come in different finishes for different effects, ranging from raw to painted. Raw and primered bumper ends are ideal for those who want to do the painting themselves, those who are into serious car customization and want to get just the right blend of color for their vehicle's front or rear. Meanwhile, some bumper ends are already painted. The most popular colors are black and chrome-the black finish is designed to match any vehicle paint color while the chrome is crafted to match the chrome bars that you might have in your vehicle.
Other than these, you'll also find bumper ends that are textured for an improved look in your vehicle. Some are polished with a natural color. If you can't find the right mix of color or finish, then you'll be glad to know that even majority of the non-raw bumper ends are paintable; you always have a lot of options when it comes to vehicle appeal.
With all these choices available, getting added protection and improved appeal in your vehicle should be easy.
Installing a New Bumper End Cap
Want some added bumper protection against impacts? Low-end collisions are common vehicle mishaps. And while they may not be generally dangerous and life threatening, they can cause considerable damage to your vehicle-they will not only render your car front or rear unsightly but will also reduce the overall value of your vehicle. That said, it is always beneficial to have added protection in your ride. The addition of new bumper ends or end caps to your front or rear bumper can help you achieve that purpose. These are easy-to-install add-ons that can give your car instant benefits. Here, we provide an easy guide to mounting bumper ends or end caps.
Difficulty Level: Easy
Tools You'll Need:
Step 1: Slide the end or end cap over the end of your vehicle bumper. Depending on the vehicle and the end or end cap that you get, it may have a retaining tab that will lock in place.
Step 2: Check to ensure that the end or end cap mounting hole aligns with the hole in the fender's underside. Then, install the mounting bolt through the two holes.
Step 3: You may see another mounting hole on the bottom of the bumper end cap. You'll need to mount another bolt in here.
Step 4: Torque the mounting bolt properly using the wrench. Be sure you apply the correct torque for proper mounting (11 foot-pounds of torque).
The mentioned process may vary depending on the kind of vehicle. But, generally, the process is easy and requires only a direct bolt-on procedure. You can also find mounting kits that already come complete with all the hardware needed for installation. Some drivers advise drilling to ensure added security and stability. You may opt to do this if you enjoy the experience and you have the skills.