Chevrolet V20: Simple Maintenance Tips for Maximum Fuel Efficiency
Even if you've bought yours used, driving a Chevrolet V20 will always be a source of pride and joy. After all, it's from a brand known to guarantee great engine performance and ample loading capacity in their trucks. The next step is for you to understand how to take care of your vehicle in order to maximize its performance and efficiency. And since gas prices are always on the rise, maximizing your dollars at the gas pump should be one of your priorities when it comes to the upkeep of your V20. Below are some maintenance tips on how to get the most fuel efficiency out of your truck:
- Always use the right oil.
Changing the engine oil is one of the most recommended steps in maintaining a vehicle. But, if you want yours to be fuel efficient, you need to make sure that you are only refilling your reservoir with the recommended grade of motor oil. If you check your owner's manual, you will find information about this. One scenario is, if you are using 10W-30 motor oil in an engine designed for 5W-30, then you can expect gas mileage to be lower by 1%-2%. When buying engine oil replacements, make sure that it says "Energy Conserving" on the API performance symbol. This way, you are sure that it contains friction-reducing additives for better engine performance.
- Always make sure that you have clean air filters.
The U.S. Department of Energy, in a recent study, found that a clogged air filter can reduce gas mileage in older cars with carbureted engine by as much as 14 percent. So for your Chevrolet V20, especially if it's a very old model, you need to check your air filter regularly and replace it once it's dirty and clogged. You can consult your owner's manual for the recommended replacement intervals. But, replacement actually depends on the condition of the environment where you drive. If you drive on roads where dust clouds are common, then you might need to replace the filters sooner than what's recommended on the manual.
- Keep your tires properly inflated.
According to fueleconomy.gov, you can improve gas mileage by up to 3.3% just by keeping your tires inflated properly. How? Properly inflated tires reduce the amount of drag that the engine must overcome when you are driving. As a result, your engine does not have to do more work to perform, which will in turn save fuel. You can find the information on correct pressure level in your owner's manual or the sticker found in the driver's side door jamb or the glove box. It is not recommended to pump the maximum pressure printed on the sidewall of your tires.
- Change your driving habits.
If you are one of those drivers who like to drive aggressively, then don't hope for fuel efficiency from your vehicle. Aggressive starting and hard braking can increase fuel consumption by as much as 40%, which is a lot. What you should do is to accelerate slowly and smoothly and then shift into high gear as quickly as possible.
- Don't scrimp on replacement parts.
When it comes to the engine, even the smallest part can make a big difference—both in performance and fuel economy. If you get low-quality spark plugs, these could easily get damaged and worn. An inferior spark plug can cause inconsistent firing, which will reduce the performance and lower fuel efficiency. Also make sure that you only buy recommended replacement parts—ones that are approved by the manufacturer for your vehicle.