Troubleshooting Tips for your Ford Escape Headlight Assembly
Your Ford Escape's headlight assembly is one of the most essential car components that you need to maintain to ensure driving safety. But through time, some of its parts would eventually succumb to wear and tear: bulbs would get busted, fuses would become blown, and lenses would get broken. So if your compact crossover is already five years old and above, might as well inspect what's behind all the headlight problems you've been encountering. Here are some troubleshooting tips that might help you out:
Headlights won't work
If all of a sudden your headlights fail you, this could be caused by a problem in the headlight relay, a blown fuse, or a defective switch. This indicates that there is no voltage coming into the headlight assembly, which hinders it from working properly. Check the main fuse of the headlight circuit for any signs of premature wear. If the fuses are okay, chances are, a bad switch is causing the headlights to fail. Replacing the switch is a bit difficult compared to changing the bulb, but we recommend that you replace it immediately to avoid further problems.
Only one headlight works
If your Ford Escape headlight assembly is equipped with an incandescent headlamp, it only has a service life of 600 to 2000 hours of use. After that duration, expect that at some point, one headlight would start to dim or completely stop working. A burnt out bulb could cause this, or a corroded electrical wiring at the back of the headlight. A bulb burns out when its filament becomes worn-out. This happens when the headlights are frequently used, especially when driving at night. Replacing the bulb is the only way out in this headlight problem.
Headlights are not illuminating the road properly
Common culprits of this scenario are dirty or fogged lenses, or headlights that are not properly aimed. Check the headlights if the lenses have moisture buildup on the insides, especially if you've recently driven to places with high temperature. A quick fix would be using a blower to remove the moisture and cleaning the lenses afterwards. If the problem persists even after you've cleaned the assembly, then probably, the headlights are not aimed properly. They could be too high, too low, or off-center. You can adjust the headlights using the adjustment screws located at the headlight housing.
Ford Escape Headlight
- Ford has been in the automotive industry since 1903 and is considered to be one of the biggest automakers in the United States.
- Ford Escape is popular for being comfortable, spacious, and well-designed.
- You know your headlights are starting to fail when you experience the following: dimming, flickering, difficulty switching to different modes, and complete malfunction.
- When choosing a Ford Escape headlight, consider its configuration, model year, make, and model for the best match.
Ford has been in the automotive industry since 1903 and is one of the biggest automakers in the United States. It was the frontrunner of the assembly line concept that streamlined the process of auto manufacturing. Among Ford’s offerings are cars, trucks, SUVs, and hybrids.
The Ford Escape over the years
The Ford Escape is a compact crossover known for comfort, spaciousness, and design. Over the years, it has undergone various evolution, and each model year became known for different features. For instance, the 07 Ford Escape has ample cargo space that makes carrying everyday items such as grocery bags or a baby stroller a breeze. The older 2005 Escape is the first year model to have an automatic transmission, an upgraded 2.3-liter four-cylinder engine, and improved suspension.
Symptoms of a Failing Ford Escape Headlight
Good headlights are essential for safe driving at night. However, regular wear and tear can damage your vehicle. It’s best to take control of the situation while the damage is still not grave, so watch out for the following symptoms.
When your headlights are not as bright anymore, it might indicate a faulty Ford Escape headlight bulb. Replace them before they go out completely to prevent accidents from happening.
Another thing you should watch out for is when your headlights flicker. This usually happens when the filaments inside the bulb wear out. Check them immediately as it could indicate a need for bulb replacement or a wiring issue.
Some modes stop working
If you find it difficult to switch to high beam and other modes, then there might be a problem with your headlight switch. Get your trusty mechanic to inspect the headlights to find out the cause of the problem.
It is also possible that your Ford Escape headlight won’t turn on at all. When this happens, it can feel tempting to not take action immediately. But don’t wait it out for too long. Driving with a busted headlight could be prohibited in your city or state, and you wouldn’t want to run into trouble with the law.
Finding the right fit
When shopping for a replacement Ford Escape headlight, it’s important to get the right fit. Ill-fitting headlights can be difficult to install and can even damage your vehicle in the long run. Consider the year of your Ford Escape when buying a replacement headlight so you can get the best fit. Take full advantage of CarParts.com’s filters so you can find the most suitable match for your car. The cost of Ford Escape Headlights is relative to the brand and quantity; it can go as low as $27.00 and as high as $1,300.00.
Tips to Keep the Ford Escape Headlight Assembly in Good Condition
Regardless of the type or brand of vehicle that you drive, it is a must to properly maintain its headlight assembly. Especially when driving in places with low visibility, the headlights should always be in proper working order to ensure road safety. However, it is inevitable that the headlight assembly would succumb to wear and tear, and simply malfunction or shut off while you are on the road. Before this happens, take these precautions to keep your Ford Escape headlight assembly in its tip-top shape:
Remove headlight condensation.
If you've noticed that your headlights seem to be a little dimmer than the usual, then you should inspect for any condensation that could have built up on the lenses. If we are correct, then the next step would be to remove the headlight assembly and bake it in a pre-heated oven with a temperature between 120 to 180 degrees for about 25 minutes. The warmth will evaporate the moisture sans the risk of softening the lens sealer. If the moisture remains unchanged, then it would be better to replace the lenses.
Clean it regularly.
Whenever you wash your car, don't just wipe the headlights with soap and water. Invest on a good cleaner that is specific for headlights. This way, soap residue will not build up on the lenses, which could also cause the headlights to be dimmer. Another way is to use a cut polish and wipe it around the headlight lenses on a circular motion. Afterwards, wipe the lenses with a clean cloth. Do this after you have washed your car.
Replace busted bulbs.
Even though you regularly clean your crossover's headlights, it won't matter if you have a busted headlight bulb. Never risk driving with a broken or busted light, unless you are looking for trouble. Replacing a bulb is easy and affordable; you can purchase aftermarket or OEM replacement bulbs for your vehicle. You can also opt to buy xenon bulbs that are more durable and brighter than traditional headlight bulbs. This is to also improve the illumination of your headlight assembly and give you a hassle-free driving in low visibility areas.
Frequently Asked Questions
How can the driver determine if the cause of flickering headlights is the light fixture itself or the alternator?
By conducting a basic power test, the car owner would be able to know if the problem is coming from the alternator or the bulbs or socket of the headlight. Ford escape has an alternator or an AC electrical generator that converts mechanical energy to electrical energy that makes the headlight work. Do the power test when the lights start to flicker. The battery voltage reading must be around 13 to 15 volts. Any data that reads below 12 volts would mean faulty charging system in the alternator.
Is it better to install halogen headlights than xenon headlights in a Ford Escape?
One of the features of a Ford Escape is its high suspension. The driver may have difficulties seeing road blocks during the night when there's no proper illumination. When it comes to brightness, Xenon headlights are way better than the halogen lights. The typical Xenon lights available in the market have a color temperature of 4,300 Kelvin. They emit white light. Halogen lamps has only 3000 Kelvin, thus they appear to have bright yellow to dim white color.
What is the most efficient way to keep the headlight lenses clean and scratch free?
The headlight assembly used in a Ford escape consists of several parts. The headlight lens is the outermost layer of the light fixture, thus it is the most exposed component. Most headlight lenses are made from glass and plastic. A basic glass cleaner from a local supermarket is the safest and cheapest degreaser. Toothpaste can also be used in removing stains and water markings on the lens. However, it cannot be used on plastic lenses because of some chemical components that are not compatible with plastics. Use only acrylic solutions because they have non-abrasive properties that are light enough for plastics.