DIY Care Tips for Your Ford Explorer Hitch
A good sports utility vehicle combines the performance, ride, comfort and amenities of a truck and a car… and maybe a little bit of a station wagon. For the Ford Explorer, it is equipped with a perfectly capable engine for you to take off at a desirable cruising speed on the highway. It also offers enough room to fit in your family. But sometimes, you need to have accessories installed to your vehicle in order to do more. In cases where you want to pull trailers or attach bike racks to the rear of your SUV, you can opt to have a Ford Explorer hitch. This piece can be mounted to your vehicle's chassis just under your original equipment bumper. But in order to continuously rip the benefits from it, you should make sure that it is always in a good condition. Here are some DIY care tips for your hitch.
- Invest on rust proofing products for your hitch. Apply regularly.
The hitch that you got for your Ford Explorer most likely has steel components. Since it can be regularly exposed to the elements, you should invest on rust proofing products for your hitch. Coating your panel with this will help you prolong its condition and ward away rusting. As you may know, once the rust starts and goes unattended, it will creep and haunt your panel for good. Apply the protective solution regularly. You won't regret doing so.
- Use it according to what its specification says.
Hitches can come in different specifications. You should keep in mind that even the one installed on your Ford Explorer has its own limitations. Use it accordingly so you can be sure that it will not be damaged without notice.
- Give your hitch a good cleaning whenever you do a car wash.
Perform a car wash every so often. This can help you eliminate any dirt build-up on your hitch. You start by rinsing it off with steady running water. Then you scrub it with a wash mitt soaked in a car shampoo mixture. Rinse the suds away and don't forget to dry.
What You Need to Know When Installing a Ford Explorer Hitch
Maybe you have been enjoying the benefits of having a Ford Explorer for some time now. This vehicle can perform different conditions and terrain. It can pass off as a daily driver whenever you need to go to work or drive off your kids to school. It drives as smooth as a car but you also get a more energetic vibe from a bigger engine and a wider body. Then there are your weekend adventures. You take it to longer drives through freeways and get to your favorite destinations. But sometimes, there are still more than just having a stock SUV that you can load your stuff inside. Having an extension of that can also be beneficial. When you install a Ford Explorer hitch, you can get that additional function. This accessory can allow your vehicle to pull trailers and carry stuff like bike racks from behind. Mounting one is not that hard as long you have the right equipment and skills to do it by yourself. So here are some things you need to know when you want to install a hitch.
Tip #1: Make sure you get a hitch that is a perfect fit to your SUV and can support your activities.
The first major concern about getting a hitch for your Ford Explorer is finding the best product to match what you have. You should think about the possible designs, load capacity, compatibility, and applications. See to it that you look into the specifications very carefully when you are presented with a pool of different hitches. The key here is doing a good research on the part to make sure that you get what best suits your vehicle and activities. From there you can study how to do the installation at the convenience of your own garage.
Tip #2: Park your Explorer properly in your garage. Jack it up if you need more clearance.
You have to make sure that your Explorer is properly parked in your garage. This will allow you to work on it without any clutter and clearance issues. Jack it up if you need more clearance to work under the chassis.
Tip #3: Align and bolt the part to place.
Carefully place the hitch to your vehicle's chassis. Align it properly before bolting it to place. Make sure the bolts are tightened.