Dos and Don'ts in Buying a Liquid Tank
Did you notice a pool forming underneath your vehicle? Are there leaks coming out of the tank? Is your engine performance demoting? Then you might want to check on your liquid tank. You can always repair the tank if there are pinholes where fuel could pass. However, tanks can also get broken in due time. If you're considering buying a new one and don't know what to do, then read on because here are the dos and don'ts to consider when buying a liquid tank.
- Determine the size of your liquid tank. If you know the measurements of your old one, then you'll know what size to buy.
- Different makes and models have different liquid tanks, so make sure that you find the one that fits perfectly in your model.
- Buy one from an established manufacturer, this way you won't have to experience the same troubles with your old one.
- Although it's inevitable for liquid tanks to damage in the long run, look for one that would service you longer than your previous one.
- Make sure that the new one that you're going to buy is made of really fine material and one that won't get holes easily.
- Explore the Internet. Though it's great to actually go inside an actual store so that you can see the new part yourself, there are also a lot on online automotive business that sell top-grade liquid tanks.
- Read reviews online to be able to know the best-selling brands in the market. It's good to read opinions of DIY experts so that you'll have an inkling as to what to find in a good liquid tank.
- Don't buy the first liquid tank you see because there might be other brands out there that sell it for a cheaper price and could probably be much more durable than the one you purchased at an impulse.
- Don't think about rummaging through scrap parts in your local salvage yards. You may be able to save up by purchasing a secondhand component, but you'll never know that this just might be a recipe for disaster.
- Don't settle for a low-quality liquid tank only to end up jeopardizing your ride. Instead, invest from a good and reputable brand.
Now that you've gone over the dos and don'ts to consider when buying a new liquid tank, you now have an idea on what to look for and where to go. Remember, these are just some tips to help you out. Don't limit yourself and feel free to explore. Good luck!
Tinker the Liquid Tank
The liquid tank is where fuel is stored in the car. If you notice any puddles underneath the car, then there must be a hole in the tank. A leaking one does not only waste fuel inside it, it can also cause complications in the engine. The best thing to do is to repair it at once. Here's a step-by-step process on how to fix the hole in your liquid tank.
Difficulty level: easy
What you'll need:
- Masking or duct tape
- Acetone or lacquer thinner
- Container for contaminated liquid
- Plastic container for mixing sealer
- Plastic wrap
- Epoxy sealer
- Rubber band
Step 1: Take the tank and drain any remaining fuel inside. Add one part lacquer thinner or acetone into the liquid tank to remove any leftover fuel.
Step 2: Using your hand, rotate the liquid tank a few times to cover the sides properly. Be sure that the liquid tank is empty.
Step 3: Remove any leftover rust by adding some drywall screws and shaking the tank for a couple of minutes. Add another one part of lacquer thinner or acetone. Before it gets dry, rinse the tank.
Step 4: Take the masking or duct tape and apply it to the holes or porous areas to prevent sealers from leaking. Meanwhile, use putty to seal the outlet ports.
Step 5: Mix two parts of the sealer for at least two minutes before pouring it inside the liquid tank.
Step 6: Use a rubber band and plastic wrap to seal the filler hole. Rotate the tank for a few minutes to allow the sealer to coat the insides. Next, remove the plastic wrap and drain any remaining sealer.
Step 7: Use a knife to scrape off any excess and allow the liquid tank to cure overnight.
Following these easy steps is a surefire way to repair the holes in your liquid tank. All you need are the tools and time and you'll be able to finish your job as soon as possible!