Select your vehicle
Refine by:
See All
See All
See All

Shop Mazda Protege5 Parts

Showing 1 - 15 of 7733 results
Display item:
15
30
45
Sort by:
Replacement RM32170003 Valve Lifter - Direct Fit, Sold individually
Vehicle Info Required to Guarantee Fit
$7.19
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Warranty : 1-year unlimited-mileage warrantyQuantity Sold : Sold individually
Replacement SET-RM32170003-16 Valve Lifter - Direct Fit, Set of 16
Vehicle Info Required to Guarantee Fit
$109.29
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Components : (16) Valve LiftersWarranty : 1-year unlimited-mileage warrantyQuantity Sold : Set of 16
Replacement SET-RM32170003-24 Valve Lifter - Direct Fit, Set of 24
Vehicle Info Required to Guarantee Fit
$163.93
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Components : (24) Valve LiftersWarranty : 1-year unlimited-mileage warrantyQuantity Sold : Set of 24
Wheel Bearing - Sold individually
Replacement
Part Number: REPM288401
Vehicle Info Required to Guarantee Fit
$22.32
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Location : Front, Driver Or Passenger SideNotes : 1.57 in. bore diameter; 2.91 in. OD; 1.57 in. widthQuantity Sold : Sold individuallyWarranty : 1-year unlimited-mileage warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including lead and mineral oils, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Wheel Bearing - Set of 2
Replacement
Part Number: SET-REPM288401-2
Vehicle Info Required to Guarantee Fit
$42.41
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Location : Front, Driver And Passenger SideNotes : 1.57 in. bore diameter; 2.91 in. OD; 1.57 in. widthComponents : (2) Wheel BearingsQuantity Sold : Set of 2Warranty : 1-year unlimited-mileage warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including lead and mineral oils, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Replacement REPT541001 IAT Sensor - Direct Fit, Sold individually
Vehicle Info Required to Guarantee Fit
$13.88
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Notes : Blade type; 2-prong male terminalWarranty : 1-year unlimited-mileage warrantyQuantity Sold : Sold individuallyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Motor Mount - Rear
Replacement
Part Number: REPM311570
Vehicle Info Required to Guarantee Fit
$12.72
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Location : RearQuantity Sold : Sold individuallyWarranty : 1-year unlimited-mileage warranty
Replacement REPM381002 Vapor Canister Purge Solenoid - Direct Fit, Sold individually
Vehicle Info Required to Guarantee Fit
$39.08
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Warranty : 1-year unlimited-mileage warrantyQuantity Sold : Sold individuallyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Transmission Mount
Replacement
Part Number: REPM311707
Vehicle Info Required to Guarantee Fit
$21.28
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Recommended Use : OE ReplacementProduct Fit : Direct FitMaterial : MetalColor/Finish : BlackWarranty : 1-year unlimited-mileage warrantyQuantity Sold : Sold individually
T-Belt Tensioner Pulley - Direct Fit
Replacement
Part Number: REPM313816
Vehicle Info Required to Guarantee Fit
$2.51
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Notes : Steel; Spring type; 2.44 in. outside diameter; 0.4 in. inside diameter; 1.54 in. widthWarranty : 1-year unlimited-mileage warrantyQuantity Sold : Sold individuallyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Cylinder Head Gasket
Replacement
Part Number: REPM312725
Vehicle Info Required to Guarantee Fit
$12.66
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base 4 Cyl 2.0L
Product Details
Notes : Multi-Layered Steel (MLS) Head GasketWarranty : 1-year unlimited-mileage warrantyQuantity Sold : Sold individuallyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Fender Liner - Front, Passenger Side, with Side Repeater Lights
Vehicle Info Required to Guarantee Fit
$11.17
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base All Engines
Product Details
Location : Front, Passenger SideReplaces OE Number : B30P56130AReplaces Partslink Number : MA1249113Quantity Sold : Sold individuallyWarranty : 1-year unlimited-mileage warranty
Fender Liner - Front, Driver Side, with Side Repeater Lights
Vehicle Info Required to Guarantee Fit
$11.17
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base All Engines
Product Details
Location : Front, Driver SideReplaces OE Number : B30P56140AReplaces Partslink Number : MA1248113Quantity Sold : Sold individuallyWarranty : 1-year unlimited-mileage warranty
Fender Liner - Front, Driver and Passenger Side, with Side Repeater Lights
Vehicle Info Required to Guarantee Fit
$21.22
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base All Engines
Product Details
Location : Front, Driver And Passenger SideComponents : (2) Fender LinersReplaces OE Number : B30P56140A, B30P56130AReplaces Partslink Number : MA1248113, MA1249113Quantity Sold : Set of 2Warranty : 1-year unlimited-mileage warranty
Mirror Manual Folding - Driver Side, Power Glass, Textured Black
Vehicle Info Required to Guarantee Fit
$27.17
Vehicle Fitment
  • 2002 - 2003 Mazda Protege5 Base All Engines
Product Details
Location : Driver SideRecommended Use : OE ReplacementGlass Operation : Power GlassHeated : Non-HeatedFolding Type : Manual FoldingColor/Finish : Textured BlackBuilt-In Signal Light : Without Signal LightPuddle Light Included : Without Puddle LightMemory Recall : Without memoryAuto-Dimming : Without Auto-DimmingBlind Spot Detection : Without Blind Spot FeatureProduct Fit : Direct FitQuantity Sold : Sold individuallyReplaces OE Number : BJ0G69180AReplaces Partslink Number : MA1320130Warranty : 1-year Kool Vue limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Page 1 of 516 | Showing 1 - 15 of 7733 results

Mazda Protege5 Customer Reviews

Mirror Manual Folding - Driver Side, Power Glass, Textured Black
Mar 22, 2020
1999 Mazda es mirror installation
Good product,good price, easy installation.
jim jim
VERIFIED PURCHASER
Purchased on Mar 01, 2020
I'm very pleased with my Kool Vue Power Mirror. It matched the one I have on the other side of my car perfectly. My car is 17 years old and they still sold the part which was great.
Denise Weber
VERIFIED PURCHASER
Purchased on Jul 23, 2019
My driver's side mirror was knocked off two times within a one year period. Checked with my mechanic first to see if he would put on the mirror if I ordered it. The first time I ordered overnight service; the second time I did not. I would suggest paying overnight because I was told it would take 4-8 days and it took 8 days. Both times the people who assisted me on the phone were very nice and concerned about my order. They were A-1.
Purchased on Feb 07, 2014

Mazda Protege5 Guides

Car De-Cluttering 101 for Your Mazda Protege5

Clutter in your Mazda Protege5 is not only stressful; it can be dangerous, too. If you have heard or read about the story regarding the empty water bottle that rolled underneath the brake pedal, making it almost impossible to press the pedal when it was time to stop the car, then you would have understood just how important a clutter-free ride is. If you have children who ride with you in the car, or if you are used to leaving stuff in your vehicle, then maintaining a clean ride might be a challenge, but there are some tips you can follow to eliminate clutter:

  • Know what belongs inside your car and what doesn't.

This doesn't mean you shouldn't bring stuff inside your ride; it means if you bring something in that isn't supposed to stay inside the cabin for good, then you should take it out as soon as you have the chance. Otherwise, you will most likely forget these things and they might soon crawl under the seats or somewhere at the rear where you won't see them and most likely forget them. Before you know it, you'll have a whole lot of junk inside your vehicle being carried around wherever you go. So remember: what you bring in should be brought out later on.

  • Get the correct car organizers for your vehicle.

There are organizers you can place behind the seat, overhead your vehicle, between the front seats, etc. These can help you maintain a pleasant car interior that is free of rubbish and litter. The trick here is to invest in car organizers that will help you save some space in your ride, complement the entire look of your vehicle, and allow you easy access to all your stored belongings whenever you need them.

  • Protect your car floor with floor mats.

Food is one of the most common sources of clutter—and dirt—inside any vehicle. And when it comes to spills, they're not only messy; they can be damaging, too. Catch unwanted fluid in your vehicle and keep them away from your carpet and car floor with floor mats and floor liners. There are so many types of mats in the market, and all you have to do is to choose one that is designed for your ride (to guarantee correct fit) and one that will enhance the look of your car interior.

  • Invest in a handy car vacuum.

Whether it's crumbs from the last takeout you had or the fur of your beloved pet during your last ride together, all of these things can make your car look messy. Investing in a high-quality and handy vacuum will be a good idea to keep your car interior free from these unsightly elements. All you have to do after every drive, or when you notice an excessive amount of dirt in your car interior, is have the vacuum ready and vacuum away. It's easy to use and will save you a lot of trouble in the long run.

The Many Names of the Mazda Protege

A rose, even when called by a different name would still smell as sweet, says Shakespeare in Romeo and Juliet. In the same manner, the Mazda Protege earned its good reputation even under different international designations and variants. Americans knew it as the GLC and the Protege, among its other titles. Here’s a brief look at the changes in its name and structure throughout its 40-year history:

The 1960s: The Mazda Familia in Japan

Mazda spent the early Sixties developing a mold-breaking micro-mini car. In October 1963, it launched the Familia, a commercial van styled by a young Giorgetto Giugaro. The company released a wagon variant the following April, but it was only that October when the Familia sedan appeared and began claiming 23 percent of the Japanese market. By December 1964, this car with 782-cc aluminum inline-4 engine became Mazda’s prime model.

Throughout the Sixties, Mazda added a coupe variant and several engine options to the Familia. The company also began exporting it as the Mazda 1000 to Australia and Oceania.

The 1970s: The Mazda 1200, 808, and the GLC in the USA

In 1971, Mazda exported the first piston-powered Familia sedan with a 1,169-cc inline-4 engine to America as the 1200. However, the company pulled it out the following year and replaced it with a larger coupe with a 1,588-cc inline-4 engine called the 808. In 1973, Mazda re-introduced the 1200 but retained the latter. During the 1976 gas crisis, the company renamed the 808 as the Mizer with a 1,272-cc TC inline-4 twin barrel engine.

A year later, Mazda replaced the Mizer with the Great Little Car or GLC. It was a standout rear-wheel drive with its hatchback, sedan, and wagon variants and had a 985-cc PC, 1,272-cc TC, or a 1,416-cc UC as engine options.

The 1980s: Mazda and its Ford models worldwide

Even as Ford acquired a percentage of its stocks in 1979, Mazda continued exporting its Familia-based cars worldwide. A year later, it introduced the Ford Laser, a restyled version with a 1,071-cc UC front-engine and several model-variants.

By 1985, this car was manufactured and sold all over the Asia-Pacific region, South America, Africa, and the Caribbean. It was known as the Ford Meteor in Australia and the Ford Tonic in South Africa.

The 1990s: The Mazda 323 and the Protege worldwide

Mazda unveiled two generations of Familia-based models for the Nineties that became the internationally renowned 323 hatchback and the Protege sedan. Buyers could choose between front- or all-wheel drives with many engine options that included the 1,598-cc B6, 1,800 B8, and the 1,300 B3. These models inspired the Mazda Familia Astina in Japan, the Kia Sephia in North America, the Laser Lynx in Europe, and a GT model exclusive to Canada.

In 1999, a redesigned BJ Familia was introduced to the United States with sedan, wagon, and hatchback variants. This formed the basis of the Protege 5, a station wagon variant released in 2001.

The 2000s: The Mazda Protege 5 and the end of the line in the USA

The 2001 Protege 5 had a 2,000-cc inline-4 engine capable of 130 horsepower and 135 pound feet of torque. It had four-wheel disc brakes, power windows, keyless entry, and other high-figure configurations that differentiated it from the Protege sedans. During its short existence, it became known as an affordable yet spacious and sporty car.

In October 2003, after 40 years of production, Mazda replaced the entire Familia-based line with the Mazda 3. However, countries other than Japan and the US still manufacture these cars under different names. The Mazda Protege’s rose continues to bloom in Southeast Asia as the Ford Lynx and in South America as the Mazda Allegro.

Helpful Automotive Resources

Best First Cars for New Drivers
May 20, 2020
Best First Cars for New DriversStarting price: $20,550
Mazda3, CX-30 Recalled for Loose Brake Caliper
June 28, 2020
Mazda3, CX-30 Recalled for Loose Brake CaliperTo fix the issue, Mazda said it will conduct an inspection of the front caliper bolts on the affected vehicles. If necessary, the calipers will be tightened or replaced if the bolts are missing. The automaker said all repairs will be done at no cost to customers.
Turbo Option Reportedly Arriving for 2021 Mazda 3
June 14, 2020
Turbo Option Reportedly Arriving for 2021 Mazda 3According to Jalopnik, the “HB” in the model code could mean “hatchback,” while “PP” could stand for Performance Package, Premium Package, or Preferred Package.
P0507 Code: Idle Control System RPM Higher than Expected
June 09, 2020
P0507 Code: Idle Control System RPM Higher than ExpectedOn many older vehicles, the car’s primary computer, which is often referred to as the powertrain control module (PCM), regulates the idle speed by controlling the movement of the Idle Speed Control (ISC) valve. When open, the ISC valve—also known as an Idle Air Control (IAC) valve—allows air to bypass
Mazda Shares Specs on Upcoming Mazda3 Turbo
July 08, 2020
Mazda Shares Specs on Upcoming Mazda3 TurboLike other models from the lineup, the new Turbo will be built with an all-wheel-drive layout paired to a six-speed automatic transmission. It will also reportedly deliver 227 horsepower and 310 lb-ft of torque, although there was no mention whether a manual gearbox will also be available. The Mazda3
Mazda Teases Announcement of Turbo Mazda 3 Hatchback
July 01, 2020
Mazda Teases Announcement of Turbo Mazda 3 HatchbackThe new Mazda 3 hatchback is believed to be equipped with a turbocharged 2.5-liter engine that delivers 250 horsepower and 310 lb-ft of torque. But, according to reports, the model is likely going to be offered with a six-speed automatic transmission.
Copyright ©2020 CarParts.com, Inc. All Rights Reserved.
Terms of Use
Privacy Policy