Sound the Alarm: Finding the Right Security Alarm System
Car theft has been around since cars were invented. Luckily, motor vehicles can now be armed with handy security alarm systems. These systems are designed to deter would-be criminals from breaking into your ride in order to steal it and/or its contents. A handy security alarm system provides more protection as compared to your typical car lock, and even calls attention to the vehicle when it's being tampered with. If you don't have a system like this for your vehicle yet, then fear not because we're here to help you find one. There are numerous innovations lately in automobile security, with each system offering its own unique features. So keep reading and find the best security alarm system for you and your ride.
Types of security alarm systems
The most basic type of security alarm system primarily consists of sensors connected to a siren. The simplest form of system is connected to the driver's door and will set off the alarm should someone open it.
Systems with more features
The more sophisticated security alarm systems come with added features. Some come with:
- Numerous sensors such as pressure sensors and motion detectors.
- A siren that's able to create a variety of sounds and allows you to pick a certain alarm sound for your vehicle.
- A radio receiver that allows wireless control from you electronic car key.
- A computer control unit that monitors everything, serving as the alarm system's "brain".
- An auxiliary battery that allows the alarm to go off even if the battery is disconnected.
Advanced alarm systems
These next security alarm systems are very advanced and offer the latest in auto security technology. Here are some features offered by such devices:
- Starter Kill- The vehicle alarm can stop the engine from running.
- Strobe light- A strobe light will flash when the siren sounds.
- Two-way paging- The vehicle alarm remote will notify you when the siren is sounding.
- Text message alert- The alarm system will send a text message to your phone when the alarm sounds.
- Remote starter- This feature allows you to start your car from a distance.
- Tilt sensor- The car alarm can sense if the vehicle is being lifted or towed.
It goes without saying that the more features your security alarm system has, the better. If you live in a nice, quiet neighborhood with a low crime rate, then the basic alarm system should do the trick. On the other hand, if you live in a more dodgy side of town, then go for the more sophisticated systems-or change towns. It all really just boils down to features, reliability, and personal preference. Of course a more advanced alarm system may require more dough, but you'll definitely get what you pay for.
Installing your Security Alarm System with Ease
Maybe your vehicle can't learn martial arts, but you can equip it with its own self defense with a new security alarm system. This system is designed to deter thieves who try to break into your ride you're your ride didn't come with a security alarm system, then it's about time that you install one. Plugging in a new alarm system is a relatively easy task that you can do with the help of some basic tools. So follow these next few steps and you'll have your ride robber-proof in no time.
Difficulty Level: Easy
- Security alarm system
- Duct tape
- Testing bulb
- Screws and screwdriver
Warning: Always wear safety gloves before doing any car repair. Your security alarm kit should include an installation manual; refer to it throughout the DIY process. Also make sure that your vehicle is parked on a flat, level surface.
Step 1: Place the car alarm siren on top of a solid metal surface and then drill a hole to pass the wires coming out of the siren and into the vehicle.
Step 2: Power up the siren. One way of doing so is by connecting the siren wires to the car battery.
Step 3: Refer to your installation manual to get the size of the fuse that will be placed on the power cable. Once you have the right size, place it on the power cable and close to the battery.
Step 4: Install the shock sensor. Usually this is placed underneath the dashboard.
Step 5: Drill a hole into your dash and pass your LED indicator cables through it. Put the two-sided mounting tape at the backside of the indicator and then position it on top of the hole.
Step 6: Install other accessories such as auto lock, door lock, and window lock.