Browsing for the Right Shackle Bushing
Even the smallest units in the automobile matter most. For example, the shackle bushing is submitted to great loading and significant effects on the car handling. Also, this offers insulation for noise, vibration, and harness, which enable the driver to have smooth control of his vehicle. If you need yours replaced because it has worn out after constant use, then we're here to help you find the right shackle bushing for your automobile.
What kind of shackle bushing should you buy?
When purchasing a shackle bushing, buy one that's made of top-quality polyurethane for higher firmness and resistance to oil, road contaminants, and coolant. This kind of bushing is capable of higher load-bearing and can greatly resist the dynamic torque-like twisting and turning forces of suspension components. When buying a new shackle bushing, make sure that it fits just right so that you won't experience any trouble when it comes to installation. It's also best if you look for one that has at least a 1-year warranty so that you can return it in case of defects.
Where can you find a shackle bushing?
It's a good idea to visit auto shops to find replacement shackle bushings. This way, should you have any inquiries, the salesperson or dealer can give you immediate answers. However, a disadvantage if you buy from stores is that some can be out of stock. If this happens, you can consider browsing through online stores and read reviews about the best brands in the industry. Then, you can just easily make your purchase by clicking and waiting for it to be shipped to you. On the other hand, don't think about rummaging through scrap pieces from your local salvage yard. You might not know how these replacement parts have been exposed.
With this quick guide on where and what kind of shackle bushing to buy, you can now go to the stores and shop for a new one. Good luck!
Replace the Shackle Bushing in No Time
Vehicles that were manufactured years back were built to have spring suspension. With this, it supported the weight of the rear axle carrier. Controlling the back of each leaf spring to the frame of the automobile is a single shackle and between the leaf spring and the frame connection points were rubber bushings. It's inevitable for shackle bushings to eventually crack especially over constant use. This can result to a squeaky suspension and if not attended to, it can damage the suspension system. Good thing, it's easy to replace the bushings on a 1964 Ford.
Difficulty level: Easy
Tools that you'll need:
- 2 jack stands
- Jack lift
- Shackle bushing replacement
Step 1: Lift the back of the car underneath the rear axle carrier using a jack lift. Lower the automobile onto the two jack stands and position them beneath the frame rail on each side.
Step 2: Place the lift jack under the center of the rear axle carrier and raise it slightly with a jack. Using a jack is essential to hold the carrier in place when the back of the leaf springs are not attached to the frame.
Step 3: Take out the single bolt that secures each shackle to the tip of its leaf spring. Use a wrench.
Step 4: With a wrench, remove the only bolt that secures each shackle to the frame of the car.
Step 5: To separate the shackles from the leaf springs, pull them apart.
Step 6: Pull the rubber bushing out of the leaf spring's end and car's frame. Take note that each bushing has two halves. One half is inserted into each side of the lead spring on each side of the frame rail. Take out a total of four bushing halves from each side of the car.
Step 7: Place the replacement bushing halves into position within the leaf spring and the frame.
Step 8: Press both halves of each shackle into place against the frame of the automobile and the end of the leaf spring.
Step 9: Mount and tighten using a wrench the single bolt that secures each shackle to the frame.
Step 10: Install and tighten with a wrench the only bolt that secures each shackle to the tip of the leaf spring.
Step 11: Lift the center of the rear axle carrier with a jack lift until the frame is off the jack stands.
Step 12: Take out the jack stands from under the car and lower it to the ground using a jack lift.
With these 12 easy steps, you'll surely have to shackle bushings replaced in no time!