Tail Light Connector Plate Buyer’s Guide
- The tail light connector plate, also known as the tail light circuit board, serves as the bridge between all the relevant parts of your tail light assembly.
- To know if your tail light connector plate is the cause of your non-working tail lights, check the bulbs and fuses first. Then, do a visual inspection of the tail light connector plate for signs of physical damage.
- If you’re purchasing an aftermarket part from a reputable car parts supplier or website, like CarParts.com, you can expect the same quality and performance as the original component.
- It’s not necessary to replace the tail light connector plates in pairs or replace the tail light bulbs at the same time.
- The cost of an aftermarket tail light connector plate can range anywhere from $10 to $60 for a single piece.
Your vehicle’s tail lights, just like your other exterior automotive lights, are some of the most important safety features on your car. Without properly functioning tail lights, the odds of becoming involved in an accident, especially while driving at night, increases exponentially. Aside from the tail light bulb and fuse, the tail light connector plate is one component that can also cause your tail lights to stop working.
What Is the Tail Light Connector Plate?
The tail light connector plate, also known as the tail light circuit board connector plate or tail light circuit board, serves as the bridge between all the relevant parts of your tail light assembly, such as the wiring and bulbs. Aside from this, the tail light connector plate also helps keep the tail light assembly organized by replacing the exposed wiring that used to be the norm in older vehicles.
Common Reasons of Tail Light Connector Plate Failure
Like any other type of circuit board, the tail light connector plate wears out the longer it’s been in use. Of course, certain outside factors, such as impact, temperature, and corrosion damage can speed up the process. If your tail light connector plate becomes exposed to moisture, the contact points can also rust and become ineffective.
Checking a Bad Tail Light Circuit Board Connector Plate
The most obvious sign of a bad tail light connector plate is a nonworking tail light. Of course, this symptom can also be caused by other components in your tail light assembly. That’s why it’s important to learn how to isolate the root cause of tail light failure. Here are some ways to determine whether a bad tail light connector plate is the actual cause of your nonworking tail lights.
Bulb and Fuse Check
The first instinct when your tail lights aren’t working is to replace your bulbs. If replacing the bulb resolves the issue, then you know that the bulb is the problem. Otherwise, check the fuse next. If it looks blown out, replace it. If the tail light still doesn’t work, you might have a bad tail light circuit board connector plate.
Physical Inspection of the Tail Light Connector Plate
Once you’ve ruled out the tail light bulb and fuse, it’s time to do a visual inspection of your tail light connector plate. Look for corroded connections, cracks, and any other physical sign of damage. You can also look for misplaced bushings or misaligned connectors. Sometimes, cleaning up the tail light connector plate is all that’s needed to make it work again.
Frequently Asked Questions About Tail Light Connector Plate Replacement
Should you choose an Original Equipment Manufacturer (OEM) or aftermarket replacement? Is it necessary to replace the tail light connector plates in pairs like the tail light bulbs? Should you replace the bulbs as well? Here are some answers to common questions about tail light connector replacement.
OEM or Aftermarket
Is there a big quality difference with OEM tail light connector plates versus aftermarket ones? Not at all. If you’re purchasing the aftermarket part from a reputable car parts supplier or website, like CarParts.com, you can expect the same quality and performance as the original component. If your vehicle has a factory tail light connector plate that’s known to fail prematurely, consider going with a higher-quality aftermarket tail light connector plate replacement when your stock one fails.
Replacing in Pairs
Since it’s highly advisable to always replace tail light bulbs in pairs, does the same rule apply for tail light connector plates as well? Not really. There are several reasons why the tail light connector plate fails. This means that they don’t necessarily fail at the same time. Moreover, purchasing tail light connector plates in pairs don’t really result in big savings for the replacement part. Still, it’s smart to check both tail light connector plates when one of them fails. This is to ensure that the other one is working just fine. Having a spare tail light connector plate also doesn’t hurt in case of emergencies.
Replacing Bulbs at the Same Time
Tail light bulbs usually wear out much quicker compared to tail light connector plates, so it isn’t necessary to replace the bulbs when you’re replacing the tail light connector plate. If you think that your bulbs are due for a replacement soon, however, you can also purchase tail light connector plates with the bulbs included This makes it more convenient, because you only need to shop for the replacement components and have them replaced or replace them yourself in one go.
Factors to Consider When Choosing a New Tail Light Connector Plate
To help you select the best tail light connector plate replacement, you must consider a few factors during the selection process. Ensuring that you’re choosing a compatible, direct-fit replacement for your stock tail light connector plate is probably the most important thing to do when you’re shopping around for a replacement. Whether you’re looking for a Ford, Chevrolet, or Honda tail light connector, it’s essential to ensure that you get one for your vehicle’s exact model.
To make the installation of your new tail light connector plate even more effortless, consider buying a replacement that has all the necessary mounting hardware. This eliminates the need for you to find or purchase them separately.
How Much Does a Tail Light Connector Cost?
The cost of an aftermarket tail light connector plate can range anywhere from $10 to $60 for a single piece. The exact cost will depend on some of the factors mentioned above and your vehicle’s exact make, model, and year. You can also purchase tail light connectors in sets of two and with replacement bulbs included.
As for labor costs, replacing the tail light connector plate is a pretty quick and straightforward job, so it shouldn’t take more than a couple of hours. In fact, it’s a very manageable DIY job for car owners who are used to working on their vehicles. Replacing the tail light connector plate usually doesn’t require the use of any special tools, especially if you purchase a replacement part that’s designed as a direct-fit or OE replacement for the original part.