Finding the Causes behind Dodge Neon Water Pump Problems
To keep engine heat at bay and ensure all internal components of your vehicle will work efficiently all the time, you need to have a reliable and durable Dodge Neon water pump in your cooling system. This part provides a steady flow of coolant to your engine and circulates this vital fluid around the metal parts to prevent them from overheating. Without sufficient coolant from the water pump, your engine will run hot and ultimately reach a point when it can no longer function. When complete engine failure happens, you'll be facing staggering repair and replacement costs. If your water pump is acting up, you need to do some troubleshooting to find the cause of the problem. Here's a guide to help you out:
A damaged water pump will usually heat up and blow the seal keeping it together, causing coolant to leak inside your vehicle. Coolant leakage will cause the temperature in your engine to rise and eventually destroy the internal components. To test the water pump for leaks, leave a piece of cardboard under it overnight. If the cardboard is soaking wet the following morning, then your water pump is indeed leaking out coolant. Aside from doing a cardboard test, you can also check for leaks by placing your hand underneath the pump when the engine is cool. If you can feel some moisture under the pump, do a visual inspection to check for cracks or punctures. Wet patches under your floor mats and car seats may also indicate a leaking water pump. Replace the pump if necessary.
If you notice a frequent rise in your engine's operating temperature, then your water pump is probably malfunctioning. This problem should be immediately addressed before the engine overheats and breaks down completely. Check the radiator and fan first for damage before inspecting the water pump. If both parts are functioning properly, then the pump is most likely the culprit behind your heated engine. A temperature gauge that shows a higher-than-normal reading and an activated check engine light usually indicate an overheating problem. Better get a replacement for your damaged water pump right away to prevent engine failure.
Avoiding Engine Heat: Tips in Keeping Your Dodge Neon Water Pump in Good Condition
Driving your vehicle with a damaged water pump is like forcing your engine to go on a suicide mission. There's absolutely no way your vehicle can survive a long day on the road if the water pump's not supplying coolant to your engine properly. Without a constant flow of coolant, the engine's temperature will rise to an abnormally high level until your entire vehicle stops functioning. Fortunately, you don't have to face these problems as long as you perform regular maintenance and routine inspections on your Dodge Neon water pump. Doing this will not only keep your water pump in good condition but also spare your wallet from staggering repair and replacement costs. Here are a couple of tips to help you out:
Patch up a broken water pump seal right away.
If your water pump is leaking coolant, check its seal for damage. Sometimes, the problem may not be the water pump, but a seal that is worn out and broken. Most water pumps are built to last for about 100,000 miles or more, but the seal may start to leak after around 50,000 or 60,000 miles. To prevent the seal from leaking out coolant and affecting the water pump's performance, patch it up with a stop-leak product. This solution is a quick fix for broken pump seals, and it is sold at most auto supply stores at a relatively cheap price. Using a stop-leak product is just a temporary solution, though. The broken pump seal must still be replaced once the stop-leak loses its effect.
Replace a damaged thermostat or a busted gasket.
To ensure the water pump works at its best, all the parts connected to it must also be in good condition. A damaged thermostat or a busted gasket may hamper the water pump's performance and cut short the supply of coolant in your engine. Extreme temperature may cause the thermostat to wear out after some time, so always check its condition along with the gasket when doing routine inspections on your water pump. Failure to replace these two parts right away may ultimately cause the water pump to stop functioning completely.